MOD TLR 22X-4 Bi-Metal Aluminum Skinny Bone Puck Kit

From MOD:

ADVANTAGES:

• 36% Less-Rotational Mass = 23.6 Gram Drivetrain Weight Savings
• Increased Acceleration
• Less Motor Fatigue
• Faster Stopping Power
• More Corner Speed
• Replaceable Puck Components
• Improved Front Bone Yoke Geometry Angle

SPECIAL FEATURES:

• All New Skinny Bone Technology for front / rear better shear strength compared to aluminum and longer bone life.
• Front Bones CVA X74mm
• Rear Bones CVA X67mm
• Works with both front / rear motor positions simply flip flop the special MOD center yoke front to rear depending on your preferred setup
• Forward Motor – Short Yoke Front (61mm) Long Yoke Rear (100mm)
• Rearward Motor – Long Yoke Front (68mm) Short Yoke Rear (93mm)
• 7075-T6 Hard Anodized Aluminum for Center Drives
• 1.5 Pucks used F/R for increased life
• Heat Treated American Grade Tool Steel
• 100% Made in the USA!

REBUILDS:

• #17045 1.5 Pucks Front / Rear
• #17015 1.0 Pucks Center (Only)

PRO TIPS:

• 500K Center Diff for Dirt / 1 million Center Diff For Carpet / Turf
• Use grease or bearing oil on the pucks to extend life
• Use 2 x .050 (#9000) to install and disassemble pucks with ease
• Main screw that holds yoke on is a 1/16 (#9001) not a 1.5 mm
• Use Locktite on all screws in kit

INCLUDES:

• F/C/R Aluminum Puck Outdrive components
• Center Aluminum Bi-Metal Bones / Short Yoke / Long Yoke
• F/R Shiny Skinny Bones
• Complimentary Outdrive and 1 full set of pucks to rebuild the kit.

Note: DO NOT USE A SLIPPER OR LOCKER WITH THIS SYSTEM, FAILURE WILL OCCUR CENTER GEAR DIFF ONLY

#20500 – $154.99
Visit MODSpeedShop.com
See more posts about MOD

Subscribe today with a Digital Edition subscription or Print + Digital combo!