MIP Tekno EB410 Pro4mance Chassis Bundle Kit [VIDEO]

MIP Tekno EB410 Pro4mance Chassis Bundle Kit [VIDEO]
 

From MIP:
The next generation 13.5 performance bundle for the Tekno EB410 is here! The MIP Pro4mance™ Chassis Bundle Kit is tuned by the MIP bold engineering team to rebalance the car and give a stable smooth drive. You will find your tuned ride engineered for maximum performance and control!

Whats New?

The new chassis re-configures the battery to the back of the chassis and lays the servo down. The end result is a more balanced weight between the front of the chassis and back resulting in a smoother drive and allows the car to rotate through corners better, break faster, and accelerate quicker than your typical Tekno EB410. The kit also features new carbon spine braces, new servo mounts and front and rear center bones which come standard with our MIP 1.5 Pucks™. This performance bundle is a must have for any serious racer! The advantage you will have against your competition will be unmatched!

Get the advantage that every stock racer craves and order yours today!

TARGET CUSTOMERS:

  • Tekno EB410

COMPETITIVE ADVANTAGES:

  • Fully Redesigned Chassis for Optimal Weight Distribution
  • Quicker Acceleration
  • Gets off Corners Quicker

INCLUDES:

1 – MIP Inst. Sheet, MIP Pro4mance Chasssis, Tekno EB410
1 – MIP Servo Tape, 1in x 6in Strip
1- MIP Lube & Thread Gel Cup
1 – BHCS, 1-72 x 1/8 Button Head, Alloy
1 – MIP Pucks, Keyed Puck Pin, No 1.5 Pucks, 1/10th
8 – MIP Keyed Drive Puck, Ten SCTE
1 – SHSS, M4 x 3mm Cup Set Screw
1 – MIP Pro4mance Chassis, Tekno EB410
2 – MIP Pucks, 17.5 Gear Diff Cup, Tekno EB410
2 – MIP Pucks, 17.5 Diff Input Drive Cup, Tekno EB410
1 – MIP Pucks, Front-Center Bone, Pro4mance Chassis, Tekno
1 – MIP Pucks, Rear-Center Bone, Pro4mance Chassis, Tekno
2 – MIP Pro4mance Chassis, Servo Mounts, Tekno EB410
1 – MIP Front Chassis Stiffener, Pro4mance Chassis, Tekno
1 – MIP Rear Chassis Stiffener, Pro4mance Chassis, Tekno
8 – FHCS, M3 x 10mm Flat Head Screw
6 – Nut, M3 x .5mm Aluminum Lock Nut
2 – SHSS, M4 x 3mm Cup Set Screw
8 – BHCS, 1-72 x 1/8 Button Head, Alloy
4 – MIP Pucks, Keyed Puck Pin, No 1.5 Pucks, 1/10th
8 – MIP Keyed Drive Puck, Ten SCTE

REQUIRES:

  • 2.0mm Wrench – (Suggest – #9008 MIP Hex Driver Wrench 2.0 mm)

COMPATIBILITY:

  • TKR6500 – EB410 1/10th 4WD Competition Electric Buggy Kit

#18010 – $225.00
Visit MIPOnline.com
See more posts about MIP

MIP Tekno EB410 Pro4mance Chassis Bundle Kit

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: January 9, 2018 — 2:11 PM
Air Age Media ©