McAllister High Side Tickler Midwest Modified Clear Body

From McAllister Racing:
This is the BRAND NEW 1/10th Scale Midwest Modified body – the High Side Tickler. This body utilizes the realistic shapes, curves, and aerodynamic advantages that you will see on the track at top modified races across the country. The air travels from the sloped nose, to the flat deck, and on back to the built in spoiler to give you the most down force without creating excess drag. This body only requires 8 fasteners and weighs about half as much as traditional fabricated “multiple piece” bodies. This is especially beneficial in spec classes where you are limited on power. The windows are designed to be left in, creating the maximum amount of steering while efficiently channeling the air directly to the rear spoiler.

The “Tickler” is a 3 piece, vacuumed formed modified for 1/10th scale buggies and purpose built chassis. The body has easy to follow cut lines and dimples for mounting properly and legally per DODC rules. Instructions are included with tips for trimming and mounting. The body is designed to be two pieces when mounted so that you can leave the nose on unless front end adjustments need to be made. The deck and hood can be easily attached to make this a one piece body if you choose. The rear of the body has a built in brace on the right side for strength and durability when you are Tickling the High Side! Two additional braces are included to be added where and if you wish.

Included:

• 3 piece body (Clear and untrimmed. Painted for example only)
  • Roof and sails (formed from .030″)
  • Nose and hood (formed from .030″)
  • Deck and sides (formed from 0.40″)
• 2 body braces
• Hardware
  • 8: 4-40×1/4″ stainless steel screws
  • 8: 4-40 nylon nuts
• Window masks
• Instructions
• Proudly Made in the USA from genuine USA made Lexan

#320 – $59.99
Visit McAllisterRacing.com
See more posts about McAllister Racing

Subscribe today with a Digital Edition subscription or Print + Digital combo!