LRP Flow X Stock Spec ESC

From LRP:

Following right on the bumper of the successful Flow X TC Spec and Flow Off Road speed contros is the Flow X Stock Spec Speedo. With experience gathered during numerous tests with LRP WorksTeam we have once again developed a new mixture, which will bring even more consistency and driving feel to Stock racing. With exceptionally smooth power delivery and special brake settings, this ESC will make you faster on any surface imaginable. The new IDFC (Initial Drive Feel Compensation) feature has been specially developed for Stock-Racing to achieve a smooth initial drive feeling over the entire running time. Thus, the function compensates for the loss of a hotter motor during a run and adjusts the throttle characteristic accordingly to ensure a constant drive feel. The new BDX-S brake completes the package for stock drivers.

The new Flow X Stock Spec comes with the following new main features:

• LRP’s exclusive Customized Super FETs (CSF-01) for highest power output and efficiency
• Heavy duty 2.8mm 8-layer power board for minimum resistance and lowest core temperatures
• New v5.1 software specialized for Stock racing including 0 boost (blinky)
• Bulletproof 6V/6A BEC for the most reliable power output
• Full aluminium case in exclusive state of the art design

All new power & logic board hardware | Customized LRP cooling plates | Lowest internal core temperature | Black super flexible WorksTeam customized power wires | Black short receiver wire | Selected hardware components | Low profile case design with improved air-flow | Easy solder system | Dust and waterproof buttons (IP68) | v5.1 Stock Spec software incl. Boost 0 | Multi-mode power profile adjustment & new MPS4 protection system

Special new brakes types BDX-S made especially for the FLOW X Stock Spec for the most consistent and powerful braking in every condition | New electronic timing algorithm for smooth and yet extreme power gains | Timing delay feature for smoothest throttle control | Optimized internal adjustments of the micro-controller parameters for faster response and consistent running | Optimized Protection levels with precision temperature readout | Tested in hardest race conditions | 100% LRP quality approved with sophisticated functional and electrical test incl. drive simulation.

Technical Data:

Cont. Current 220A
Peak Current up to 1800A
Voltage Input 7.4V (2S)
Motor Limit >2.5T
BEC 6V/6A
Software v5.1
Case Size 33.7×32.6×19.8mm
Weight 44g (excl. wires)
Power system Sensored brushless
Driving function Forward/Brake
Power Wires WorksTeam 12 AWG black
Receiver Wire longer than TC Spec

#500005 – $189.99

Visit LRP-AmericaStore.com
See more posts about LRP

Subscribe today with a Digital Edition subscription or Print + Digital combo!