Losi RTR 1/8 8IGHT-T 4WD Nitro Truggy

Losi RTR 1/8 8IGHT-T 4WD Nitro Truggy

losi-rtr-1_8-8ight-t-4wd-nitro-truggy-9 losi-rtr-1_8-8ight-t-4wd-nitro-truggy-2 losi-rtr-1_8-8ight-t-4wd-nitro-truggy-5

From Losi:

If you are serious about becoming a competitive nitro truggy racer, this is the place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .28 nitro engine and the precise response that only a Spektrum™ DSMR® radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle’s performance with many of the 8IGHT-T option parts currently available.

Heavy-Duty Steering and Gen III Radio Tray

The vehicle comes equipped with a Spektrum™ ultra-torque metal-gear steering servo that maintains superb holding power and precise control on the roughest tracks. A Gen III radio tray prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It resists wear and tear from chassis flex, too.

Brute Power

A powerful Dynamite .28 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don’t have to buy a starter box to get racing right away.

Metal-Gear Drivetrain and Sealed Differentials

A metal-gear transmission and sealed differentials give the truggy all the durability it needs for long mains and rough conditions.

Center and Rear Dogbones

These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.

Pre-Set Suspension Geometry

The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.


  • Your fast track to nitro truggy racing
  • 4mm T-6 aluminum chassis plate
  • Spektrum™ ultra-torque waterproof metal-gear steering servo
  • Gen III radio tray for longer servo life
  • Dynamite® .28 nitro engine with pull start
  • Pre-set suspension geometry
  • Metal-gear transmission and sealed differentials
  • Center and rear dogbones
  • 15mm adjustable oil-filled shocks
  • Spektrum™ waterproof metal-gear servo
  • Includes Spektrum DX2E DSMR® transmitter
  • Includes Dynamite 1600mAh 6V NiMH receiver pack

Needed To Complete:

  • 20-30% Nitromethane fuel
  • Nitromethane-Approved Dispenser
  • NiMH Charger
  • Glow Igniter


Approximate Assembly Time:     No assembly required
Ball Bearings:     Full Precision Ball Bearings
Batteries:     Dynamite NiMH Battery 6V 1600mAh Reciever Pack 3+2 Hump
Body:     Painted/Screened
Brakes:     Dual Disc
Chassis:     4mm Plate, Aluminum
Completion Level:     Ready-To-Run
Differential:     Fluid Gear Diff
Drivetrain:     4WD
Engine Size:     Dynamite .28 Nitro Engine
Final Drive Ratio:     15.03:1
Fuel Tank Capacity:     125cc (4.2 Oz)
Gear Pitch:     1.0 Module
Height:     7.30 in (185.5mm)
Internal Gear Ratio:     3.91:1
Length:     18.75 in (476mm)
Model Type:     Car/Truck
Pinion:     13T
Radio:     DX2E
Servos:     Included
Shock Type:     15mm bore, Composite
Size/Scale:     1/8
Spur Gear:     50T
Suspension:     4-wheel Independent
Tire Tread:     XTT
Vehicle Type:     Truggy
Wheel Type:     Racing Dish
Wheelbase:     14.93-15.09 in (379-383mm)
Width:     16.38 in (416.1mm)

#LOS04011 – $624.99
Visit Losi.com
See more posts about Losi

losi-rtr-1_8-8ight-t-4wd-nitro-truggy-8 losi-rtr-1_8-8ight-t-4wd-nitro-truggy-7 losi-rtr-1_8-8ight-t-4wd-nitro-truggy-6 losi-rtr-1_8-8ight-t-4wd-nitro-truggy-4 losi-rtr-1_8-8ight-t-4wd-nitro-truggy-3 losi-rtr-1_8-8ight-t-4wd-nitro-truggy-1

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: October 20, 2016 — 5:42 PM
Air Age Media ©