From Locked Up RC:
Made of high quality aluminum this ring is drilled to match the Axial AX10 2.2″ bead lock ring mounting pattern and goes perfectly with our Recluse wheel design.
This version receives a gold color chemical film coating after machining.
The coating has a nice appearance alone but also promotes paint and primer adhesion for those of you wanting to go with a custom paint job
- -1x 2.2″ Tarantula Golden Chromate
Bead Diameter – 2.2″
Width – 3mm
Weight – .4oz
Our Easy Mount® wheel system only uses 6 screws to hold the ring to the wheel, making your life much easier when working with foams and weights. An additional 18 screws thread into the ring and slide into larger holes in our Easy Mount® wheels. We suggest M2x7 (or M2x8) screws to hold the ring on. The remaining 18 screws can be M2x8 or shorter.
If you do not have our Easy Mount® wheels you can still use our Easy Mount® rings by using 18 of our M2x1 screws to thread into the ring.
If you already have your own M2 hardware of your choice, you can cut it flush with the back of the ring like we used to do for all our installations.
Note: No hardware is included with our rings
Never miss an issue of RC Car Action!
Subscribe today with a Digital Edition subscription or Print + Digital combo!
Tarantula 2.2” beadlock ring in Golden Chromate.