From Locked Up RC:
AO8™ axle flanges work with our AO8™ style wheels.
These pin style flanges mount directly to your axle shaft and remove the need for a hex hub.
Includes (2x) 285 Phoenix Portal axle flanges (hardware sold separately) which is enough for 2 wheels.
This version is specifically made to work on the Vanquish VS4-10 Phoenix with Portals.
The center holes on this version may not work on other vehicles so please see our other listings if you do not have a VS410 with portals.
AO8™ axle flange numbers indicate material between the pin and wheel mount face:
285 = 2.85mm
485 = 4.85mm
685 = 6.85mm
885 = 8.85mm
*Our 285 Phoenix axle flanges, used with our standard width/offset 1.9″ wheels will give a narrower track width compared to the stock Phoenix wheel setup (#4 hubs) by about 6mm per side. **Our 735 Hex Flanges, used with our Phoenix Wheel Hexes & standard width/offset 1.9″ wheels will give the same track width as the stock Phoenix wheel setup (#4 hubs).