Locked Up RC 1.9″ Stator Bead Lock Rings

From Locked Up RC:
Our 1.9″ Stator bead lock rings have a unique stepped cog design.

This look is a first for us and may also function as side biters in tight situations.

This is also the ring we used in the middle of our “2 Rings, 1 Wheel” setup.

Made of high quality aluminum this ring is drilled to match the Axial 1.9″ bead lock ring mounting pattern.

What’s included:

• 1x 1.9″ TrailReady World Series Blue bead lock ring

Dimensions:

Bead Diameter – 1.9″
Width – 3mm”
Weight – .35oz

Our Easy Mount® wheel system only uses 6 screws to hold the ring to the wheel, making your life much easier when working with foams and weights. An additional 18 screws thread into the ring and slide into larger holes in our Easy Mount® wheels. We suggest M2x7 (or M2x8) screws to hold the ring on. The remaining 18 screws can be M2x8 or shorter.

If you do not have our Easy Mount® wheels you can still use our Easy Mount® rings by using 18 of our M2x1 screws to thread into the ring.

If you already have your own M2 hardware of your choice, you can cut it flush with the back of the ring like we used to do for all our installations.

No hardware is included with our rings.

#169H – $6.50
Visit LockedUpRC.com
See more posts about Locked Up RC