Traxxas Hoss 4X4 VXL

Kyosho RC Surfer 4 Readyset

Kyosho RC Surfer 4 Readyset

From Kyosho:
RC Surfer returns for everyone to enjoy again!

Kyosho’s 4th release of the RC Surfer that amazed the world with its innovative form and function rides the waves again. Reinforced stainless shafted rudder and improved surfer figure add extra reliability. We have also adopted 2 graphic designs for surfboards. Not just for R/C fans, real wave riders will also appreciate the function and form of the R/C Surfer. Buoyant material inside the surfboard structure and hollow surfer figure with floatation function combines with the auto-recovery mechanism to make the R/C Surfer practically unsinkable. While the natural habitat of the R/C Surfer is the sea, its dynamic response also functions well on the flat waters of lakes and rivers. Anti corrosive materials mean you can focus on surfing the R/C Surfer in any type of water. Simply install the surfer figure onto the factory-assembled surfboard and you are ready to ride the waves without assembly or adjustment as soon as you charge the battery with Delta Peak USB Charger. The R/C Surfer 4 captures the spirit and fun of surfing like never before.

Features:

  • Redesigned color scheme by 2 graphic designed surfboards.
  • Pre-assembled and adjusted Readyset.
  • Waterproof board design incorporates practically unsinkable built-in float.
  • Reinforced pre-painted figure with hollow structure also functions as a float. O-ring damper in the surfers feet reduce damage from impact.
  • Newly designed stainless shafted rudder adapts to banking posture and also protects the propeller.
  • 24T 540-class motor installed with water-cooling jacket maintains performance over long drive times.
  • Equipped with KYOSHO SPEED HOUSE KA060-91W 60A ESC that controls high 60A current.
  • RC Surfer is an RC model powered by a propeller. Cannot be used to surf without electric power.
  • Figure is not movable.
  • Max speed or usage time can vary depending on usage conditions.
  • Equipped KYOSHO SPEED HOUSE KA060-91W 60A ESC. A 24T 540-class motor installed with water-cooling jacket maintains performance over long run times.
  • Unique shaped rudder with new reinforced stainless steel shaft delivers improved durability and ultimate control for riding waves. Also helps to protect propeller when beaching the surfer.
  • Rudder servo linkage can be accessed by removing round cover on the rear of the surfboard.
  • Reinforced realistic surfer figure features hollow structure and functions as a balance float to support auto recovery and anti capsize.

Kit Contents:

  • Pre-colored surf board installed with R/C system, complete with linkages
  • Complete pre-painted surfer figure
  • KT-231P 2.4GHz 2ch pistol grip type transmitter
  • 7.2V-2200mAh SCR NiMH battery
  • Ni-MH battery dedicated delta peak USB charger

Required for Operation:

  • AA batteries X 4 for Radio

Technical Data:

Length: 660mm
Width: 160mm
Height: 325mm
Weight: 1,500g approx.
Motor: 540-class G24 motor with water-cooling jacket
Propeller: D31 x P1.4 (polycarbonate)
Charging Time: 8 hours approx. 16km/h approx.
Operation time: 7 min approx.

#40110T1 – 40110T1 RC SURFER 4 Blue – $219.99
#40110T2 – 40110T2 RC SURFER 4 Black – $219.99
Visit KyoshoAmerica.com
See more posts about Kyosho

Kyosho RC Surfer 4 Readyset  Kyosho RC Surfer 4 Readyset

Kyosho RC Surfer 4 Readyset Kyosho RC Surfer 4 Readyset

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: September 18, 2019 — 10:46 AM

4 Comments

Add a Comment
  1. Hey can you suggest a specific 2 cell battery that will actually fit in the space given in RCS4? None of mine fit and are hard case batteries 2 cell lipos. Any help would appreciated thanks.

    1. Ah so you are saying that you have a 2S hard case LiPo but it won’t fit? This comes with a NiMH pack so I wonder if it doesn’t allow for a square shaped pack since those NiMH packs have rounded corners. If you want to use a LiPo for more power you might have to go with soft pack or non hard case pack.

    2. Check the Amain review of the surfer, he recommends a protek graphine something…so I went to the site, typed that in and scrolled until I saw the one in the shape that fits. I just ordered it…

  2. Fantastic that Kyosho releasing a 4th model! …
    but the reason I’ve seen that this hasn’t taken off is because ppl buy one and on the first wave the ‘Dude’ breaks … on my first wave his Right leg broke… I was lucky to get thr board and his leg back. but others haven’t been so lucky and this bad experience is enough to put ppl off !

    Kyosho will replace the dude for free if you mail them .. but this doesn’t solve the problem!!

    the dude is too weak !! you can buy a upgraded dude for abt 120$ from rcsurfrider.com but this is an additional cost !! why haven’t Kyosho Fixed this issue??

    my Dude’s name is #kaircsurfer
    and I Foam injected mine …very much DIY style but hey he handles A beating now, if you check his Instagram I’ve put pics of what I’ve done

    In summary I LOVE my RC Surfer 3 !!

    a custom sticker kit gives mine personality, at the beach many ppl ask many questions but in the end I tell them Its a Great Toy just check Kai’s Instagram to see what they in for

Leave a Reply

Your email address will not be published. Required fields are marked *

Air Age Media © 2020
WordPress Image Lightbox