Absolute Hobbyz 900x250
Log In

Kyosho INFERNO MP9e Evo Kit

Kyosho INFERNO MP9e Evo Kit

Kyosho INFERNO MP9e Evo Kit Kyosho INFERNO MP9e Evo Kit Kyosho INFERNO MP9e Evo Kit

From Kyosho:
ith an unrivaled record of 8 World Championship titles, Kyosho’s flagship Inferno model evolves from the MP9e TKI4 into the latest MP9e Evo. electric powered model that achieves even more dynamic performance through a new advanced chassis layout and body design. The highly regarded flat control and aerial posture of the previous model has been maintained while a forward weight shift has improved balance for superior handling. In addition, subtle changes to the battery mount create a lower center of gravity that combines with the race-tested body design of the MP9e Evo. to deliver superior cornering, traction, and rough surface performance required of a racing buggy to perform successfully at the highest level. The MP9e Evo. is the key to racing glory.

CHASSIS

Features front and rear suspension and drive systems from the latest Inferno MP9 TKI4 10th Anniversary Special Edition. Layout of the A7075T6 hard anodized aluminum chassis have been specifically designed for the MP9e Evo. to optimize weight distribution for electric power performance and a lower center of gravity.

Motor Mount

Machined aluminum clamp type motor mount fixes the motor firmly and eliminates motor flex while running for increased reliability. Pre-drilled holes are available for mounting a cooling fan (sold separately).

Strap Mounting System

Lowered position of the battery creates a low center gravity and combines with a hook and loop strap mounting system that doesn’t interfere with the chassis’ flex. This also allows for multiple types of battery configurations to be used.

Detachable ESC mount and wire holders

Detachable ESC mount design allows easy installation and removal for maintenance. In addition, maximum forward mounting position uses the weight of the ESC for improving steering and can easily be relocated to the rear in looser track conditions. Wire holders on both the center plate and motor mount allow for a cleaner and more reliable wire setup.

Shocks and Front Suspension

Hard plated threaded shock cases with aeration caps are included and deliver smooth damping function over an extended period while reducing silicone oil contamination. Front suspension combines long sus arms with 17.5° angle caster hub carriers for increased steering response and stability on rough tracks.

Steering Plate

New steering plate features a revised tie-rod mount position to optimize ackermann ratio and increase control.

Body

The new body sits lower and has a shorter, narrower and less aggressive cabin design combined with a unique stretched out rooftop center fin that improves straight line stability.

Kit Contents:

  • Unassembled chassis kit
  • Clear body and decal set
  • Wheels
  • Silicon oils for diffs (#3000,#5000)
  • L type hex wrenches (1.5mm,2.0mm,2.5mm,3.0mm)
  • Cross wrench
  • 17mm wheel wrench

Required for Operation:

  • 2-3ch transmitter and receiver
  • Servo
  • Batteries for transmitter
  • Brushless motor and ESC system
  • Batteries and charger for chassis
  • Tires and inserts
  • Tools
  • Instant glue
  • Silicon shock oils
  • Paint for body

Chassis Technical Data:

Length: 490mm
Width: 307mm
Height: 180mm
Wheelbase: 325mm (adjust by changing rear hub collar)
Tread (F/R): 254mm
Tires (F/R): Sold separately
Gear ratio: 10.14:1 (gear module: 1.0)
Weight: 3,770g approx.

#34105B – $699.99
Visit KyoshoAmerica.com
See more posts about Kyosho

Kyosho INFERNO MP9e Evo Kit Kyosho INFERNO MP9e Evo Kit Kyosho INFERNO MP9e Evo Kit Kyosho INFERNO MP9e Evo Kit

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: July 12, 2018 — 4:41 PM
Venom Drive Line 600x120
Track Directory 600x120

Leave a Reply

Your email address will not be published. Required fields are marked *

Airage Media © 2018
Assign a menu in the Right Menu options.
WordPress Image Lightbox