Landwave Ramps You Gotta Try This - V2 900x250

Kyosho Inferno MP10 TKI2 1/8 Nitro 4WD Buggy [VIDEO]

Kyosho Inferno MP10 TKI2 1/8 Nitro 4WD Buggy [VIDEO]

Kyosho Inferno MP10 TKI2 1/8 Nitro 4WD Buggy

Kyosho Inferno MP10 TKI2 1/8 Nitro 4WD Buggy

Kyosho Inferno MP10 TKI2 1/8 Nitro 4WD Buggy

From Kyosho:
MP10 EVOLVES WITH EVEN GREATER PERFORMANCE FOR RACING BATTLE FOR THE NEVER-ENDING PURSUIT OF VICTORY

INFERNO MP10 TKI2

1:8 Scale .21 Engine Powered 4WD Racing Buggy

NEW BODY

A newly designed body takes the high-level aerodynamic characteristics of the MP10 body in a more aggressive direction. The feeling of lightness through the corners is enhanced, which greatly contributes to faster lap times, especially on more technical circuits.

DIFF GEARS

Revised gearing results in changes to the number of teeth of the differential gear and bevel gear to reduce the secondary reduction ratio from the MP10’s 3.31:1 to the TKI2’s 3.5:1. This delivers improved acceleration characteristics and response to the driver’s throttle inputs for superior maneuverability.

SPUR GEAR

With changes to the secondary reduction ratio, the standard 46T spur gear in the MP10 kit has been changed to 45T. The final reduction ratio is 12.1:1, which places a greater emphasis on acceleration and achieves improved pickup. Different gear settings are also available with optional parts.

BIG SHOCK

The front and rear shocks are 3mm longer than the standard MP10 with 4mm longer front shafts and 3mm longer rear shafts. Springs have been lengthened accordingly. Front length of 78 mm and the rear length of 95 mm provide superior shock absorption through the full suspension stroke.

DAMPER CAP

Increased wall thickness reinforces shock caps and ball housing dramatically improves strength. The shock cap is specifically for the diaphragm shocks and guarantees stable damping force even through endurance races.

STABILIZER

Stabilizers have been increased in diameter to f2.6mm (Front) and f2.8mm (Rear) from f2.3mm and f2.5mm respectively and work in combination with longer shocks and springs for optimized roll characteristics through corners.

SHOCK STAY

In combination with the longer shocks, the optional shock stay is equipped as standard and provides optimized mounting positions and a new color. Suspension stroke can be increased for improved stability and running performance over surface gaps and jump landings.

LOWER SUS. ARM

Rear suspension arm shape has been modified for the longer shocks to prevent interference with the spring retainer when the suspension arm moves in the rebound direction. This realizes optimal suspension stroke.

MAIN CHASSIS

The basic layout is the same as the MP10 base model, but handling is improved through enhancements of the suspension. Super Duralumin used for the main chassis realizes lightweight and high rigidity that can handle the severity of hard driving.

#33022
Visit KyoshoAmerica.com
See more posts about Kyosho

Kyosho Inferno MP10 TKI2 1/8 Nitro 4WD Buggy Kyosho Inferno MP10 TKI2 1/8 Nitro 4WD Buggy Kyosho Inferno MP10 TKI2 1/8 Nitro 4WD Buggy

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Eaglemoss Jeep willys 600x120
Updated: December 21, 2020 — 10:48 AM

Leave a Reply

Your email address will not be published. Required fields are marked *

Air Age Media © 2021
WordPress Image Lightbox