Kyosho EP JETSTREAM 888 VE Readyset

From Kyosho:
Hit maximum speed of approximately 60km/h with 14.8V 4-cell Li-Po battery (sold separately). The high-performance EP Jet Stream 888VE Readyset has made minor changes using newly developed brushless motor and ESC. In the event of a capsize; the weight balance is changed by water entering the ballast room to right the hull to its normal upright posture and automatically drain out allowing the boat to continue running. This unsinkable design removes the risk and worry of losing your boat if it flips over. The high-precision CNC aluminum intake rudder with adjustable bracket and high-durability metal adjustable flaps with excellent wave resistance are retained, and upgraded power unit to KYOSHO SPEED HOUSE.The combination of scaled up water-cooled brushless motor (40x68mm) and upgraded 120A capacity KA120-91WC water-cooled waterproof brushless ESC brings more fun to run racing boat than ever.

Features:

• Pre-colored FRP factory assembled hull reaches speeds of 60km/h.
• Pre-installed KYOSHO SPEED HOUSE TORX M4 brushless water-cooled motor (40x68mm, KV2000) generates excellent torque.
• Newly designed KYOSHO SPEED HOUSE KA120-91WC water-cooled, waterproof ESC
• Unsinkable self-righting feature.
• Flip-up rudder design prevents damage if boat contacts an obstacle.
• Equipped with combination turn fin and trim tab with adjustable angle.
• Features stopper to prevent loss of shaft.
• Includes drip proof rubber boots, aluminum servo mount, carbon nylon 3-blade propeller.
• Ready to run after you arrange LiPo battery.
• Tilt angle of the machine cut CNC aluminum variable propeller bracket can be adjusted to obtain the optimum drive angle. Bearing equipped prop shaft support delivers high efficiency power transfer.
• Magnetic lock hatch open/closes without using any tools. Built-in waterproof radio box with double-hatch protects R/C system components from water. Servos are installed and linkage set up is complete.
• KYOSHO Speed House TORX M4 brushless motor and KA120-91WC ESC are pre-installed.
• CNC aluminum rudder features flip-up design to help avoid damage if contact is made.

Kit Contents:

• Pre-colored fully assembled hull
• Water-cooled brushless motor and ESC
• Rudder servo
• Boat stand
• Spare propeller
• Waterproof clear tape
• .4GHz Syncro KT-231P transmitter

Required for Operation:

• 4 cell 14.8V 3600-4000mAh LiPO battery (Super Plug / compatible size: L138 x W46 x H33mm / L162 x W46 x H25mm or less)
• Recommended : No.GAB2401 Gens ace LiPo4000 (45C/14.8V/soft pack)
• Quick Charger for LiPo battery
• 4 x AA sized batteries for transmitter

Technical Data:

Length: 900mm
Width: 187mm
Height: 140mm
Weight: 1,780g (when 14.8V-4000mAh installed)
Motor: KYOSHO SPEED HOUSE TORX M4 Brushless water-cooled motor (40x68mm, KV2000)
Battery: 4 cell 14.8V 3600-4000mAh LiPO (Super Plug specification, sold separately)
Propeller: Carbon reinforced nylon D40 x P1.4 (3-blade)
ESC: KYOSHO SPEED HOUSE 120A KA120-91WC water-cooled, waterproof brushless ESC
Servo: KS-4031-06W

#40232S2 – $519.99
Visit KyoshoAmerica.com
See more posts about Kyosho

Subscribe today with a Digital Edition subscription or Print + Digital combo!