TRX-4 Winch

JConcepts 1968 Pontiac Firebird Pro Clear Drag Car Body

JConcepts 1968 Pontiac Firebird Pro Clear Drag Car Body

From JConcepts:
JConcepts begins to stretch its legs in the Drag Racing scene with the introduction of the new Pontiac Firebird. The new 1968 styled body dubbed, “The Machine” has been an immediate hit on and off the race track and prototyped and driven by JConcepts drivers across the United States. The new body shell protrudes confidence with its low-profile stature, super low Firebird V-nose, built-in front splitter and crowned shaped hood line.

The Firebird has a long silhouette allowing an even displacement of downforce over the front and rear end helping the body gain grip where needed. When a driver makes initial throttle response, the over-hang in the rear and built-in rear side-dams help the vehicle gain forward traction and launch stability. Getting up to speed with “The Machine” is possible with the low-slung roof-line which handles the at-speed handling. The large lay-down front windshield cuts through the wind like a fighter jet while the recessed side-windows provide just enough visibility for a Pro Mod.

The front-end of the body is important to maximize the MPH and elapsed time during any pass. The heavy front-end rake allows the vehicle to hold tight on the “big end” of the race track. With just enough clearance to fit over most front suspension components, “The Machine” hangs tough in performance and aesthetics. A slight hood-scoop runs the center-line of the body over the crowned hood which makes perfect space for painting decoration or sponsor decals.

The recessed front-end looks complete by adding included headlight, grille and duct decals to highlight a branded area of the body. Drop below the grille to the built-in splitter, trim to the lowest cutline to cut through the air with accuracy. Small wheel wells close up large gaps around the tires and an ultra-low cutline on the rocker panel area allows the body to have a low drape effect. The final feature, the long roof-line extended to the trunk section blends into a built-in gurney type wing for downforce even without adding additional wings or aerodynamics.

The JConcepts body includes overspray film on top of the body, window mask for quick paint and prep and detailed Pontiac Firebird / JConcepts decal sheet. The product is always backed by JConcepts customer service, supported, and developed by professionals with style and authenticity.

Features:

  • Officially licensed by GM to JConcepts
  • Body measures 11.00″ in width and 13″ wheelbase
  • Fits a variety of platforms including DR10, Losi 22S, and Drag Slash
  • Scale inspired body, cab, and window design
  • 1:1 headlight and grill treatment
  • Clear heavy-duty polycarbonate with protective film
  • Window masks and detailed Pontiac Firebird / JConcepts decal sheet

GMC, Chevrolet, Pontiac, and nameplates are registered trademarks owned and licensed by General Motors.

Revo®, JATO™, T-MAXX™, SLASH®, DRAG SLASH® SLASH 4X4®, Rustler®, Stampede® etc. are trademarks and registered trademarks of Traxxas L.P.

1968 Pontiac Firebird Pro – The Machine
Part # – 0455
Retail price – $60.00
Map price – $51.00
(Fits – DR10, 22S, Drag Slash – 11.00″ width & 13″ wheelbase)
Visit JConcepts.net
See more posts about JConcepts

JConcepts 1968 Pontiac Firebird Pro Clear Drag Car Body JConcepts 1968 Pontiac Firebird Pro Clear Drag Car Body JConcepts 1968 Pontiac Firebird Pro Clear Drag Car Body JConcepts 1968 Pontiac Firebird Pro Clear Drag Car Body JConcepts 1968 Pontiac Firebird Pro Clear Drag Car Body

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Eaglemoss Mustang Eleanor 600x120
Updated: June 8, 2021 — 9:20 AM

Leave a Reply

Your email address will not be published. Required fields are marked *

Air Age Media © 2021