HPI RTR 2015 Ken Block Ford Fiesta ST RX43 WR8 Flux

HPI RTR 2015 Ken Block Ford Fiesta ST RX43 WR8 Flux

From HPI:

Get behind the wheel of Ken Block’s “Intergalactic” 2015 Ford® Fiesta ST RX43! You can count on the Flux Vektor 4000kV brushless motor for instant acceleration and 60+ top speeds, while the Flux Vapor Pro ESC has what it takes to handle today’s most powerful 2S and 3S LiPo batteries.

The 3 mm aluminum chassis is built to last; the double wishbone suspension is fully adjustable; rally-style suspension geometry, custom-designed shock towers and extra-thick sway bars combine with tough bevel gear diffs for precise control.

Rubber Gymkhana Grid Spec tires, replica fifteen52 TurboMac wheels and a 2.4GHz radio system put the finishing touches on this must-have rally racer!


  • Goes from a standing start to 60+ mph almost instantly!
  • 3 mm aluminum chassis, based on the Bullet monster truck
  • Full-time 4WD, rally-style suspension and extra-thick sway bars
  • Vektor 4000kV brushless motor
  • Waterproof Vapor Pro ESC, steering servo and receiver
  • 2.4GHz radio system
  • Coil-over oil shocks with adjustable ride height
  • Dual bellcrank steering
  • Tarmac grid-spec tires and replica fifteen52 Turbomac wheels


Length: 19.1 in (485 mm)
Width: 8.9 in (227 mm)
Height: 6.8 in (172 mm)
Weight: 4.65 lb (2109 g)
Wheelbase: 11.8 in (300 mm)
Requires: 6-cell NiMH or 2S-3S LiPo
battery with Star™ Plug, charger &
“AA” batteries

115383 – 1/8 Ken Block 2015 Ford Fiesta WR8 Flux BL 4WD RTR – $479.99

[nggallery id=1417]

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: October 21, 2016 — 2:43 PM
Air Age Media ©