Hot Bodies R10 Nitro Touring Car Kit

Hot Bodies R10 Nitro Touring Car Kit

This new nitro car comes as a kit and includes high quality universal driveshafts, hard coated aluminum pulleys, and a 4-piece engine mount compatible with both OS and Novarossi type engines. Check out the press release below for more:

The HB R10 is the latest kit from the minds at HB-HPI to enter the exciting and fast world of 1/10th scale on-road touring car racing! This time, we’re diving into the nitro end of the racing arena, with a unique, high-spec nitro touring car kit that is sure to amaze nitro racing fans!

Top-level nitro touring cars are a completely different type of racing class compared to electric touring cars – you can’t just add an engine to any touring car design and be off to the races. Properly designing and testing a car takes months, even years plus the standard of materials and design has to be at the highest level. At over 60mph, even on smaller tracks, every componenent has to serve a purpose and be designed to perform! That’s why only the best materials went into the R10: titanium, aircraft aluminum, carbon graphite, top-grade composites and more.

The R10 is built from the ground up to perform and to win. Experience the thrill of nitro racing with a World Championship racing team!


  • Centralized lower weight distribution provides superb balance with increased transitional agility
  • High quality universal driveshafts front and rear for the best drive efficiency
  • Titanium tie-rods, rear camber links, middle shafts and rear sway bar joints
  • Hard coated aluminum pulleys (except the rear diff pulley)
  • Separate (upper and lower) bulkheads allow for quick and easy diff change and drive belt tension adjustments
  • New fuel tank equipped with EZ cap designed for least fuel liquid level change for the best fuel efficiency
  • 4-piece engine mount compatible with both OS and Novarossi type engines
  • High precision brake rotor and brake pads made from the same material used in full scale racing cars provide superb stopping power and brake feel
  • Servo saver with one-touch Ackerman adjustment system
  • Multiple suspension pivot point adjustment system allows for fine roll center tuning
  • Direct fit wing mounts on rear shock tower
  • PTFE-coated oil shocks
  • Efficient .08 module gears


Length: 366mm
Width: 200mm
Wheelbase: 261mm
Weight: 1700g
Gear ratio:
1st=7.56:1.0 2nd=5.27:1.0

108382 $599.99 MAP

[nggallery id=1033]

If you like this article, check out this additional article on Hot Bodies.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!


Updated: July 20, 2015 — 3:51 PM
Air Age Media ©