HOBBYWING XeRun XR10 Pro WP ESC

From HOBBYWING:
IP67 protection, all-weather operation

The new XR10 Pro-WP is able to easily handle conditions, from rain, dust, and sand with a proven waterproof and dust-proof design that is exceeds IP67 industrial standards.

Note: Do not submerge. Damage may occur when submerged.

Built-in reverse polarity protection circuit

The ESC has built in reverse voltage protection. This ensures the ESC will be protected from accidental cross connection of the battery.

Note: The reverse polarity protection of the entire power system can be achieved only by using the non-polarity capacitor sold as an option. The standard capacitor of the ESC does not have this protection. Reverse connection of the battery will damage the capacitor, but the ESC should not be damaged. Replacement of the capacitor is needed immediately.

Smart Fan start & stop function

The fan does not run when the ESC temperature is low. The fan automatically turns on when the ESC temperature reaches the preset value. The smart fan start&stop function not only reduces noise, saves power, but also ensures that the ESC works in the optimal temperature range.

Equipped with powerful core processor

The 32-bit M4 processor greatly improves the data processing capabilities of the ESC. It not only allows the ESC to respond faster but is able to perform complexity and precise data calculations It lays the foundation for subsequent ESC function upgrades and optimization. Professional competition-grade hardware combined with powerful software makes it a weapon global competition.

Adjustable throttle curvature

New throttle curvature adjustments allow additional tuning of the throttle response. With +10 curve, to -10 curve settings, and custom Curve allow drivers more options to get the perfect throttle feel.

Real-time data acquisition easy analysis

When connected to the OTA module, and using the HW Link V2 App, bench top live data can be monitored. You are able to view, Throttle, Voltage, Temperatures, and RPM in real time. The ESC also supports additional data logs when operated with the OTA installed. Data logs are saved to the OTA to be viewed after the run.

Note: The effective Bluetooth transmission distance is approximately 5m!

Use the OTA Module and your Phone/Tablet to Tune the ESC.

The OTA module allows you to connect to your ESC using the HW Link V2 app. This allows ESC tuning and Firmware updates.

Built-in BEC supporting high-voltage servos

The ESC has a built in switch mode BEC rated up to 10 amps. BEC voltage is adjustable from 5-7.4 volts. (0.1v steps) The internal BEC is able to easily handle todays most power hungry servos.

Max Brake Tuning – 101%-150%

Active brake provides stronger brake force and ensures Stock/Spec class racing setups have enough stopping power. Developed for the ESC brakes to handle very tall spec racing gear ratios that are commonly used.

Wide range of applications

Based on the flagship XR10 Pro series platform, it has strong output capability and is suitable for various Modify and Stock competitions in 1/10 on-road and 1/10 off-road.

Specs:

Scale: 1/10th
Brushed/Brushless: BL
Sensored/Sensorless: SD
Waterproof: Waterproof
Cont./Peak Current: 160A/1200A
Input Voltage: 2S Lipo
BEC BEC Output: Switch Mode 5V-7.4V @5A
Input Wires: Black-13AWG-200mm*2
Output Wires: Black-13AWG-200mm*3
Input Connectors: No
Output Connectors: No
Size: 25*25*10mm
Voltage Range: 5-7.4V
Powered by: BEC
SET Button on ESC: Not Supported
LED Program Box: Not Supported
LCD G2 Program Box: Supported
LCD PRO: Supported
OTA Programmer: Supported
Program Port: Separate Program Port
Extreme value: Supported
Real-time Data: Supported
Historical data (Graph): Supported
Firmware Upgrade: Supported
Size: 37.7*37.2*19.6mm
Weight: 95.6g(w/Wires)
Motors: Sensored brushless motors / Sensorless brushless motors
Vehicles: 1/10th Touring car & Buggy racing, 1/10th Drift,F1,Rally
KV Rating/T Count: Touring Car: ≥4.5T Buggy: ≥5.5T

#30112618
Visit HOBBYWINGDirect.com
See more posts about HOBBYWING