Brushless Electronic Speed Controller

Intelligent freewheeling technology, greatly improved performance

The innovative intelligent freewheeling technology enables higher driving efficiency and lower operating temperature of the ESC, and further improves the stability and reliability of the ESC.

Powerful built-in BEC

The ESC has a built-in BEC with a continuous current of 5A and supports a maximum output current of up to 10A. The output voltages are switchable between 6V, 7.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market.

Continuous current of 5A

Maximum output current of up to 10A

The output voltages are switchable between 6V/7.4V

Efficient cooling system

The integrated radiator design, combined with the patented copper thermal conduction sink on the internal power board of the ESC, facilitates the rapid conduction of internal heat to the radiator, and the fan is added to dissipate heat. These results an efficient heat dissipation system to ensure that the ESC is always in a good heat dissipation state.

Capacitor Thermal Protection

Capacitor thermal protection is designed and implemented into the ESC to effectively prevent capacitors from exploding and causing irreversible damages to the ESC due to overloading.

Built-in capacitor

Super large built-in capacitor, The built-in capacitor of the ESC is as high as 1640uF. External capacitors are not needed for 10th scale models on the market and helps improves ease of use.

High protection level, all-weather operation

The IP-67 waterproof Rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit.

Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product.


Scale: 1/10th
Brushed/Brushless: Brushless
Sensored/Sensorless: Sensorless
Waterproof: Yes
Cont./Peak Current: 120A/760A
Input Voltage: 2S-4S Lipo
BEC Output: Switch Mode 6V/7.4V @5A

Wires & Connectors

Input Wires: Black-12AWG-150MMmm*1 / Red–12AWG-150MMmm*1
Output Connectors: 4.0mm Gold (female)

Size & Weight

Size: 52.8*39.8*38.2mm
Weight: 119g (Included wires&connectors)


Motors: Sensorless / Sensored Brushless Motor (only in sensorless mode)
Vehicles: 1/10th Short course truck, Monster truck
KV Rating/T Count: 3652、3660 Size Motor

Visit HOBBYWINGDirect.com
See more posts about HOBBYWING

RC Car Action - RC Cars & Trucks | HOBBYWING QuicRun WP 10BL120 G2 ESC RC Car Action - RC Cars & Trucks | HOBBYWING QuicRun WP 10BL120 G2 ESC RC Car Action - RC Cars & Trucks | HOBBYWING QuicRun WP 10BL120 G2 ESC

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: May 30, 2023 — 10:55 AM
Air Age Media ©