Hitec D956WP 32bit High Torque Waterproof Steel Gear Servo

Hitec D956WP 32bit High Torque Waterproof Steel Gear Servo

From Hitec:
The wait is over! Our highly-anticipated, exceptional torque-master D956WP has arrived! Based off the D954SW servo, this IP-67 rated version is the true waterproof, dust resistant upgrade for 1/10th-scale Rock Crawlers and Off-Road Trucks. As with our entire “D” line, this technologically-advanced servo is powered by our 32-bit MCU (Microcontroller Unit) and 12-bit ADC (Analog to Digital Converter) industrial science and possesses Smart Sense engineering with rapid, high-resolution response. The unprecedented programmability and wide-voltage capabilities deliver the most progressive, leading-edge performance for all radio control needs. With incredibly durable steel gears, dual ball bearing and hardened steel output shaft, the high-end performing D956WP produces the mighty torque and reliability required to take bashers to the next level.

Features:

  • Programmable PWM Digital Amplifier
  • 32-Bit MCU with 12-Bit ADC Circuitry
  • 4096 Resolution
  • M Cycle Long Life Potentiometer
  • Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
  • Dual Ball Bearing Supported Output Shaft
  • 25-Tooth Output Spline
  • Coreless Metal Brush Motors
  • Nylon Reinforced Plastic Upper and Lower Case
  • Diamond Cut Aluminum Heat Sink Center Case
  • Water Resistant and Waterproof Proof Case

Programmable Functions:

  • End Point Adjustments
  • Direction
  • Fail Safe
  • Dead Band
  • Speed (Slower)
  • Soft Start Rate
  • Overload Protection
  • Data Save / Load
  • Program Reset

Specifications:

Operating Voltage Range (Volts DC): 4.8V ~ 7.4V
Speed (Second @ 60°): 0.19 ~ 0.12
Maximum Torque Range oz. / in.: 251 ~ 405
Maximum Torque Range kg. / cm.: 18.0 ~ 29.0
Current Draw at Idle: 30 mA
No Load Operating Current Draw: 500 mA
Stall Current Draw: 5,200 mA
Dead Band Width: 1 µs

Physical Specifications:

Dimensions (Inches): 1.57 x 0.78 x 1.46
Dimensions (Metric): 40.0 x 20.0 x 37.0
Weight (Ounces): 2.40
Weight (Gram): 68.0
Circuit Type: 32bit Programable Digital
Motor Type: Coreless Metal Brush
Gear Material: MK 1st Gear & 3 Steel Alloy Gears
Bearing Type: Dual Ball Bearing
Output Shaft (type / Ømm): H25T
Case Material: Plastic / Aluminum
Dust / Water Resistance: IP67 Rating
Connector Gauge (AWG) / Strand Count: 20 / 80

Radio Control Applications:

Parkflyer: N / A
Sport Plane: 30 – 40%
Sailplane: 2 meters and up
3D Performance: 30 – 40%
Scale: 30 – 40%
Electric Helicopter: N / A
Gas Helicopter: N / A
On Road: 1/8th
Monster Truck: 1/8th
Buggies: 1/8th
Truggies: 1/8th
Short Course / Truck: 1/8th
Crawlers: 1/8th
Sail Boat: = >1M & Scale
Power Boat: N/A

#36956

Visit HitecRCD.com
See more posts about Hitec

Hitec D956WP 32bit High Torque Waterproof Steel Gear Servo Hitec D956WP 32bit High Torque Waterproof Steel Gear Servo Hitec D956WP 32bit High Torque Waterproof Steel Gear Servo

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: June 18, 2019 — 4:49 PM
Air Age Media ©