HB Racing D2 Evo 1/10 Competition Electric 2WD Buggy Kit (Updated)

HB Racing D2 Evo 1/10 Competition Electric 2WD Buggy Kit (Updated)

HB Racing D2 Evo 1/10 Competition Electric 2WD Buggy Kit (Updated) HB Racing D2 Evo 1/10 Competition Electric 2WD Buggy Kit (Updated) HB Racing D2 Evo 1/10 Competition Electric 2WD Buggy Kit (Updated)

From HB Racing:
Priority Pre-Orders are now open for the long awaited D2 Evo from HB Racing. This car is very special. HB designer Torrance Deguzman did a great job creating the most modern 1/10th scale 2WD Buggy. The D2 Evo features extensive use of precision CNC aluminum parts. woven carbon fiber, and composite nylon material. The D2 Evo has a wide range of adjustability so racers can tune it for maximum performance on the wide variety of 1/10 racetracks around the world. And signature HB design features, like our race proven monocoque suspension arms, means the D2 Evo will be familiar to all HB racers. Visit www.hbracing.com to reserve one of the first 1000 D2 Evo kits produced. Priority will be given to the Pre-Orders, and from what it looks like. by the end of this week the first batch will be fully pre-sold. This time you should not be fast only on the track, but also behind your computer or phone!

NOTES FROM D2 EVO DESIGNER TORRANCE DEGUZMAN:

“The D2 Evo was designed for total adjustability. Out of all the RC car racing categories, the 1/10 scale off-roaders are the most difficult to design because they race on a wide range of track surfaces, a wide variety of tires and even different tire sizes. As shown in the list of features, the D2 Evo covers that range. We’ve also implemented design features from our other kits to enhance this car, like machined aluminum components for higher precision and durability, monocoque suspension arms which have been a staple of HB off-roaders for the past decade, and droop screws which are ubiquitous in 1/8 scale but should add a level of convenience for 1/10 2WD.”

Features:

  • Aluminum front arm mounts with optional adjustable kickup
  • Monocoque suspension arms with carbon fiber inserts as pioneered by HB in 1/8 scale & 1/10 4WD Gullwing suspension arm design front & rear
  • Aluminum caster blocks with caster adjustment bushings included
  • Adjustable Ackermann geothetry via optional steering hub arms
  • Adjustable droop setting via droop screws similar to 1/8 scale buggies
  • Ball bearing supported steering bellcranks with aluminum steering rack
  • Flat plate aluminum chassis so optional materials like carbon fiber can be used depending on racing conditions
  • Adjustable battery position with quick change O-ring retainers
  • Motor cooling fan mounts built into the side guards
  • Dual disc adjustable slipper clutch
  • Machined aluminum gearbox with 3-gear laydown configuration
  • Easy access differential (ball & gear diff available)
  • Aluminum rear hubs with inserts for various hinge pin heights
  • Fully adjustable camber link position using spacers
  • Both inboard and outboard camber mounts can be finely adjusted up & down as well as inward & outward Clamping aluminum wheel hex drives
  • Arm mount inserts for toe-in and anti-squat adjustment

The D2 Evo is supplied in kit form. Requires body, wing, battery, motor, ESC, radio, receiver, servo, paint, tires, CA glue, wheels.

#204240 – $659.99
Visit HBRacing.com
See more posts about HB Racing

HB Racing D2 Evo 1/10 Competition Electric 2WD Buggy Kit (Updated) HB Racing D2 Evo 1/10 Competition Electric 2WD Buggy Kit (Updated) HB Racing D2 Evo 1/10 Competition Electric 2WD Buggy Kit (Updated) HB Racing D2 Evo 1/10 Competition Electric 2WD Buggy Kit (Updated) HB Racing D2 Evo 1/10 Competition Electric 2WD Buggy Kit (Updated) HB Racing D2 Evo 1/10 Competition Electric 2WD Buggy Kit (Updated) HB Racing D2 Evo 1/10 Competition Electric 2WD Buggy Kit (Updated)

 

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: June 20, 2022 — 11:46 AM
Air Age Media © 2022