Fantom “Super D” Dreighton Stoub Signature Series ICON v2 Pro Modified Motors

From Fantom Racing:
Fantom team driver Dreighton Stoub, a.k.a. Super D, is one of the most recognizable names in the world, in R/C off-road racing. With 4 ROAR National Championships and countless other championships under his belt, he came to us with an idea to start offering the same motors and servos that he uses. We didn’t hesitate. After many hours of testing motor setups and different servos, we are proud to introduce our new line of Super D – Dreighton Stoub Signature Series modified motors and servos.

SUPER D – DREIGHTON STOUB Signature Series – ICON v2 Pro Modified Motors

Fantom team driver Dreighton Stoub, a.k.a. Super D, is one of the most recognizable names in the world, in R/C off-road racing. With 4 ROAR National Championships and countless other championships under his belt, he came to us with an idea to start offering the same motors and servos that he uses. We didn’t hesitate. After many hours of testing motor setups and different servos, we are proud to introduce our new line of Super D – Dreighton Stoub Signature Series modified motors and servos.

The Super D line of modified motors includes a 6.0 turn, used by Dreighton in his 4wd cars, and a 7.0 turn that he uses in his 2wd cars. Dreighton has world-class driving skills, so we had to come up with motors that met his high standards for great feel, power delivery, usable torque, speed, and the lowest lap times possible. Both of our new Super D 6.0T and 7.0T motors are set up and tuned exactly how Dreighton runs them! Put a Super D motor in your car today and see what it feels like to run what a champion uses!

The Super D motors start with our – Designed in the USA, ICON v2 Pro Modified stator, for the ULTIMATE RAW POWER, TORQUE, RPM & EFFICIENCY! The heart of the ICON v2 stator is our “Patented” (U.S. Patent D823,803) design. Our patented design stator produces maximum torque, incredible RPM, and superior drive-ability!

WHAT’S DIFFERENT WITH THE SUPER D MOTORS…

• 12.0mm Rotor with Dreighton’s preferred magnet material (different than our standard 12.0mm rotor)
• Professionally built to our strict standards
• The rotor properly shimmed with brass shims
• The highest grade AXON X10 SUJ2 hybrid bearings
• Pro Titanium Timing Adjustment Screws
• Timing set to Dreighton’s specifications
• Complete evaluation of the coils, rotor strength, rotor asymmetry, and sensor board deviation
• All test results printed and included
• Recommended for 1:10 2wd buggy

SPECS AND FEATURES:

• All R&D Done In The USA Patented Stator Design (U.S. Patent D823,803)
• Stator Design for Maximized Torque & Efficiency
• Sensor Board Design for Improved Deviation Accuracy & Reliability
• Precision Machined 1-Piece Can Design
• High-Inductance / Low Resistance, 3mm Aluminum, Silver Plated Collector Ring
• Venting & Can Designed to Maximize Heat Dissipation
• Premium Grade Kawasaki® Steel Stator Plates
• CNC Machined Billet T6 Aluminum End Plate for Precision Bearing Alignment
• Maximized Adjustable Timing
• High RPM Precision Bearings
• 12.0mm Dreighton Stoub Specifications Rotor
• Meets All BRCA, IFMAR, EFRA Specifications
• ROAR Approval Pending
• Patented Stator Design (U.S. Patent D823,803)

WHAT THE DETAILS MEAN…

• 12.0mm Rotor – We tested numerous sizes and magnet material until we found a combination that Dreighton prefers best. The rest is top secret!
• Re-Shim (brass shims) – We adjust the rotor shims so that the rotor “floats” centered properly within the magnetic field. If required, the rotor shaft is also polished to ensure that it fits the inner race of the bearing correctly. We also make sure that it has the correct end play, so that it is not bound up or too loose.
• AXON X10 Bearings – We have tested every motor bearing that we can get our hands on and these are the best that we can find! These are incredibly high-tolerance bearings and feature special SUJ2 material balls and a proprietary coating on the races. The SUJ2 balls are not ceramic and not stainless steel. SUJ2 material is harder than stainless steel and tougher than ceramic. The proprietary coating on the races reduces the rolling resistance and adds to the durability, making them the most free spinning, accurate, and durable bearings available for r/c motors. In addition, these bearings also feature no-contact seals, for virtually no drag caused by the seals. These bearings are lighter and capable of achieving higher RPM’s compared to standard chrome steel bearings. Also, we make sure the bearings seats are sized correctly before installing the bearings. This ensures that the bearings are not squeezed or distorted when installed, which could cause extra drag or non-concentric bearing movement.
• Pro Titanium Timing Adjustment Screws – These eliminate the power robbing magnetic drag on the rotor that the stock steel screws cause and improves RPM, efficiency and horsepower! Increases RPM by 100+ RPM compared to the stock steel screws! Reduces weight by .26 grams compared to the stock steel screws!
• Motor Timing – Motor timing is one of the most important settings to insure your motor is running at it’s maximum performance. The correct motor timing and gearing makes all the difference in the world with how well you motor performs on the track. When you buy a Super D motor, your motor comes set exactly how Dreighton sets his.
• Rotor Strength Test – The rotor is tested to make sure it meets proper specs. If we find that the rotor does not meet our strict standards, we will replace it. With this test, the rotor’s magnetic field strength is tested on our Fantom Facts Machine v3 rotor tester, and the test results are included.
• Coil Resistance Test – The stator is tested to make sure it meets proper specs. With this test, we evaluate the ohms resistance of the stator to make sure it meets proper specs and to detect shorts. Each coil is tested individually. If we find that the stator does not meet our strict standards, we will replace it. With this test, the stator coils are tested on an Instek GOM-804, and the test results are included.
• Motor Evaluation – The motor is evaluated using the highly accurate Motolyser brushless motor tester. This includes checking the rotor asymmetry, as well as the sensor board deviation and timing accuracy, and the test results are included.

FEEL THE POWER…FEEL THE FANTOM

6.0 Turn – SUPER D – DREIGHTON STOUB Signature Series – ICON V2 Pro Modified – $129.99
7.0 Turn – SUPER D – DREIGHTON STOUB Signature Series – ICON v2 Pro Modified – $129.99

Super D – Dreighton Stoub Signature Series – High Torque, HV, Low Profile, Programmable, Digital Racing Servos

Fantom team driver Dreighton Stoub, a.k.a. Super D, is one of the most recognizable names in the world, in R/C off-road racing. With 4 ROAR National Championships and countless other championships under his belt, he came to us with an idea to start offering the same motors and servos that he uses. We didn’t hesitate. After many hours of testing different servos and motor setups, we are proud to introduce our new line of Super D – Dreighton Stoub Signature Series servos and modified motors.

The Super D line of servos includes a low profile version (FR720) and a standard profile version (FR745). Dreighton has world-class hand-eye coordination, so we had to find servos that met his high standards for great feel, accuracy, and superior torque with plenty of speed. We met his demands with the FR720 and FR745 high performance servos. Both are right at home in all surface 1:10 and 1:8 scale cars, and help keep Dreighton at the top of his game!

FEATURES:

• High Performance Low Profile Digital Racing Servo
• Meets Dreighton’s high standards for feel, accuracy, torque, and speed
• High Precision Steel Gears
• High Performance Brushless Motor
• Dual Ball Bearings
• Full Aluminum Cooling Case
• Water and Dust Resistant (not water proof)
• Programmable (with Fantom USB Programmer – Sold Separately)
• Includes 25 Tooth Aluminum Servo Horn
• Ideal for for all surface 1:10 and 1:8 scale racing applications

SPECIFICATIONS:

FAN22720

Operating Voltage: 4.8-8.4 V
Operating speed: 0.090sec/60° @ 6.0V
Operating speed: 0.080sec/60° @ 7.4V
Operating speed: 0.070sec/60° @ 8.4V
Stall Torque: 17.0 kg-cm (236 oz-in) @ 6.0V
Stall Torque: 19.5 kg-cm (271 oz-in) @ 7.4V
Stall Torque: 20.0 kg-cm (278 oz-in) @ 8.4V
Control System: Pulse Width Modulation Control
Signal Mode: Digital
Refresh Rate: 333 Hz
Neutral Position: 1520uS
Signal Range: 500 to 2500 uSec
Dead Band: 2 uSec
Operating Travel: 180º ± 10°
Mechanical Angle: 220°
Gears: Steel
Case Material: Full Aluminum
Motor: Brushless
Size: L40.8mm x W20.2mm x H26.5mm (1.60 x 0.79 x 1.04 in)
Operating Temperature: 5° to 158º F.
Weight: 62g
Connector Wire: JR 50mm

FAN22745

Operating Voltage: 4.8-8.4 V
Operating speed: 0.115sec/60° @ 6.0V
Operating speed: 0.100sec/60° @ 7.4V
Operating speed: 0.085sec/60° @ 8.4V
Stall Torque: 34 kg-cm (473 oz-in) @ 6.0V
Stall Torque: 39 kg-cm (542 oz-in) @ 7.4V
Stall Torque: 45 kg-cm (625 oz-in) @ 8.4V
Control System: Pulse Width Modulation Control
Signal Mode: Digital
Refresh Rate: 333 Hz
Neutral Position: 1520uS
Signal Range: 500 to 2500 uSec
Dead Band: 2 uSec
Operating Travel: 180º ± 10°
Mechanical Angle: 220°
Gears: Steel
Case Material: Full Aluminum
Motor: Brushless
Size: L40mm x W20mm x H37.2mm (1.57 x 0.78 x 1.46 in)
Operating Temperature: 5° to 158º F.
Weight: 83g
Connector Wire: JR 150mm

#FAN22720 – FR720 20KG Super D – Dreighton Stoub Signature Series – High Torque, HV, Low Profile, Programmable, Digital Racing Servo – $149.99
#FAN22745 – FR745 45KG Super D – Dreighton Stoub Signature Series – High Torque, HV, Standard Profile, Programmable, Digital Racing Servo – $159.99
Visit FantomRacing.com
See more posts about Fantom Racing

Subscribe today with a Digital Edition subscription or Print + Digital combo!