From Factory Team:
New flat and tapered FT 16mm shock pistons for RC8B3 and RC8T3 series 16mm shocks are available now! Machined from high quality Delrin(R), they add more tuning options to dial in suspension settings.
Flat pistons have equal compression and rebound, making them ideal on smoother surfaces.
Tapered pistons have less resistance when the shaft is traveling in the direction of the taper angle. If the taper angle is set down, the piston will have less resistance in rebound and more resistance during compression. This makes tapered pistons more ideal on rough surfaces.
Fits: 16mm shock bodies for the RC8B3.2, RC8B3.2e, RC8T3.2, RC8T3.2e, and other 1:8 vehicles.
Pro Setup Tip
The piston holes can be drilled to larger diameters for even more tuning options:
Above: 3×1.5 + 2×1.6 means 3 of 5 holes are 1.5mm, and 2 of 5 holes are 1.6mm diameter.
#81201 – FT 16mm Shock Piston, 5×1.3mm, flat – $17.99
#81202 – FT 16mm Shock Piston, 6×1.3mm, flat – $17.99
#81206 – FT 16mm Shock Piston, 5×1.3mm, tapered – $17.99
#81207 – FT 16mm Shock Piston, 6×1.3mm, tapered – $17.99
#WeAreAE
Visit AssociatedElectrics.com/FactoryTeam
See more posts about Factory Team