RCCA Membership 900x250
Log In

ECX RTR Barrage Gen2 1/12 4WD 1.55 Scaler [VIDEO]

ECX RTR Barrage Gen2 1/12 4WD 1.55 Scaler [VIDEO]
 

ECX RTR Barrage Gen2 1/12 4WD 1.55 Scaler ECX RTR Barrage Gen2 1/12 4WD 1.55 Scaler ECX RTR Barrage Gen2 1/12 4WD 1.55 Scaler

From ECX:
The ECX® 1/12 Barrage® Gen2 4WD 1.55 Scaler crawler is built to tackle the most terrifying of terrain. This version builds upon the original Barrage scaler’s impressive reputation with exclusive features at an amazing price. Perfect for the price conscious consumer looking to move into the growing scaler movement, this crawler can take on all challenges no matter your skill level. It uses a 1.55″ wheel and licensed Falken Wildpeak M/T tires significantly refining the look of the body to wheel proportion. The Gen2 has axle housings that no longer require the wide wheel hex extensions. This strengthens the axles and provides more consistent steering. Larger servo mount and steering links allow for bigger servos while the Dynamite® Tazer™ 390 size motor runs cooler and with more torque. A true 4-link suspension with improved articulation and strength is a substantial upgrade. From the brand known for its rugged durability, this scaler is a great introduction to extreme driving through any ruthless environment including rocks, woods, mud and your neighborhood creek. Plus, you get all of this excitement without breaking your budget or your drivetrain.

Features:

  • Scale Body and Chassis
  • Completely Ready to Run: Everything needed is in the box
  • Metal Ring and Pinion Gears: Durability and longevity
  • Aluminum Links, Motor Plate and Shock Cap Retainers: Durability and styling
  • Combination Composite and Aluminum Main Frame: High strength and durability
  • ECX 2.4GHz TX and RX: Interference free driving
  • 900mAh Battery: Over 30 minutes of run time
  • One Step Charger: Plug in the battery and it charges automatically
  • Full Ball Bearings: Efficiency and increased run time
  • Super User Friendly Speeds with Impressive Crawling Capabilities: Fun for anyone from beginner to expert

Needed to Complete:

  • Nothing! Everything you need is in the box.

What’s in the box?

(1) ECX 1/12 Barrage Gen2 4WD 1.55 Scaler RTR
(1) ECX 2.4GHz 2-CH V4 Surface Transmitter (ECX13008)
(1) ECX 2.4GHz 2-CH V4 Receiver (ECX13009)
(1) 100mAh 9V AC Charger with EC3™ Connector
(1) Dynamite Speedpack® 7.2V 900mAh NiMH battery with EC3 Connector (DYN1462)
(1) Dynamite Tazer 390 Brushed Motor (DYNS1206)
(1) Dynamite 60A WP FWD/REV Brushed ESC (DYNS2210)
(1) Spektrum™ Digital Servo (SPMS602)
(4) AA Batteries
(1) User Manual

Licensed Falken Wildpeak M/T tires

Soft compound treaded tires provide superior grip over most surfaces

Waterproof Electronics

Drive in any conditions.

Oil-Filled, Coil-Over Shocks

Adjustability and superior handling.

4-Link Suspension

Increased articulation and ability to scale most obstacles.

High Torque 390 Motor

Maximum crawling power in small efficient package.

Full Size Axle Mounted Steering Servo

Can use readily available electronics to help keep weight down low to provide low CG.

4WD Drivetrain

Metal ring and pinion gears with locked differentials for no slip extreme climbing power.

Specs:

Approximate Assembly Time: No assembly required
Ball Bearings: Complete
Batteries: 900mAh 6-cell NiMH
Body: Painted
Charger: AC Wallwart
Chassis: Steel Ladder Frame
Completion Level: Ready-To-Run
Differential: Locked
Drivetrain: 4WD
Front Track: 7.0 in (177mm)
Gear Pitch: 48-Pitch
Ground Clearance: 2.55 in (64mm)
Height: 8.8 in (223mm)
Length: 16.4 in (417mm)
Motor Size: 390
Motor Type: Brushed
Painted or Clear Bodies: Painted
Pinion: 22T
Radio: 2.4GHz
Rear Track: 7.0 in (177mm)
Servos: Included
Shock Type: 3 in (75mm) Composite body
Size/Scale: 1/12
Speed Control: Included
Spur Gear: 60T
Suspension: Solid Axle 4-Link
Tire Diameter: 3.9 in (100mm)
Tire Tread: Falken Wildpeak MT
Vehicle Type: Rock Crawler
Water-Resistant: Yes
Weight: 2.8lb (1.3kg)
Wheel Diameter: 1.55 in (39mm)
Wheel Type: Black Molded
Wheel Width: 1.1 in (28mm)
Wheelbase: 9.9 in (252mm)
Width: 7.7 in (196mm)

#ECX01013T1 – 1/12 Barrage Gen2 1.55 4WD Scaler Brushed RTR: Blue – $179.99
#ECX01013T2 – 1/12 Barrage Gen2 1.55 4WD Scaler Brushed RTR: Yellow – $179.99

Visit ECXRC.com
See more posts about ECX

ECX RTR Barrage Gen2 1/12 4WD 1.55 Scaler ECX RTR Barrage Gen2 1/12 4WD 1.55 Scaler ECX RTR Barrage Gen2 1/12 4WD 1.55 Scaler ECX RTR Barrage Gen2 1/12 4WD 1.55 Scaler ECX RTR Barrage Gen2 1/12 4WD 1.55 Scaler ECX RTR Barrage Gen2 1/12 4WD 1.55 Scaler

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: March 22, 2018 — 3:15 PM
Venom Drive Line 600x120
Track Directory 600x120

Leave a Reply

Your email address will not be published. Required fields are marked *

Airage Media © 2018
Assign a menu in the Right Menu options.
WordPress Image Lightbox