Introducing the new NAC-40 Charger from CORE RC.
Getting into the radio controlled hobby can be complex, and the world of battery charging is no exception.
The CORE RC NAC-40 is an AC and DC charger suitable for NiMH and NiCad batteries.
Designed with great simplicity in mind, the NAC-40 has the option of using DC 11-18v input via a 12v battery or separate power supply, or AC mains input 100-240v.
On the output side there is a fully wired and ready to go Tamiya connector for 4-7 cell packs, or the option for receiver packs via a Futaba plug in the front.
3 simple fast charge currents can be deployed using the front switch, 1.5A, 3A or 5A.
The charger detects the peak voltage of the battery and automatically cut off the charging. It also has a safety timer to cut off all charging after 90 minutes.
Attractively packaged, sure to fly off the shelves.
Supplied with UK 240V AC lead and DC lead with crocodile clips. Pre-wired with Tamiya output lead. Instructions included.
AC input: 100-240v.
DC input: 11-18v.
Suitable for NiMh, NiCad batteries.
Voltage peak detection.
Charge current: 1.5A, 3A, 5A.
Two output ports: Tam port & Futaba-J port.
See more posts about Schumacher