CEN Racing Ford F250 SD KG1 Lifted Edition [VIDEO]

CEN Racing Ford F250 SD KG1 Lifted Edition [VIDEO]

CEN Racing Ford F250 SD KG1 Lifted Edition

CEN Racing Ford F250 SD KG1 Lifted Edition

CEN Racing Ford F250 SD KG1 Lifted Edition

From CEN Racing:
Ford F-250 Super Duty Custom Truck Specs

Features:

RGB LED Light:

  • Stander Under Fender Multicolor RGB LED.

ESC 40A WP-1040-Brushed (By HobbyWing).

  • Water-Proof and Dust-Proof for All Weather.
  • Built-In Capacitor Module.
  • Automatic Throttle Range Calibration.
  • Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.
  • Over-Heat Protection and Throttle Signal Loss Protection.

Motor

  • RS-540 High Torque Brushed Motor.

Servo

  • 12Kg Metal Gear Servo (By Savox).
  • 4.8V 0.26 sec/60° 10.0 kg-cm.
  • 6.0V 0.23 sec/60° 12.0 kg-cm.
  • 25T Horn Gear Spline.

Radio System

  • Pistol-Grip Mod-3S 3 Channel Transmitter.
  • Digital Trimming.
  • Steering Dual-Rate (ST D/R) Adjustment.
  • End Point Adjustment (EPA).
  • Build in Failsafe.
  • Transmitter Model: 82190
  • Frequencies: 2.4GHz
  • Weight: 375gm
  • Power Supply: 4 AA Alkaline (Not Included).

Receiver

  • Receiver Model: G82191
  • Frequency: 2.4GHz
  • Power Supply: DC 4.8 ~ 6.0V
  • Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H).

Body:

  • Official Licensed by Ford Motor
  • F-250 Super Duty.
  • Scale Realistic Body Details.
  • Black Bed Liner Coating.
  • Hard Molded Front & Rear bumpers with build in 3mm LED housing

Chassis:

  • Steel Frame Rails.
  • CMS (Chassis Mounted Servo) Chassis Design.
  • Stamped Steel Shock Hoops.
  • Steel Skid Plate.
  • Full Precision Ball Bearing Supported.
  • Adjustable Turnbuckles.
  • High Torque Servo Saver Horn.
  • Easy Access Battery Tray.
  • Battery Tray Size 146 x 50 x 25mm.

Suspension:

  • Custom Lifted Suspension Design.
  • 110mm Big Bore Oil Filled Adjustable Coil Over Shocks.
  • 12mm over size shock body with 3mm Hardened Steel Polished Shaft.
  • Harden Steel Steering Drag Link.
  • CNC Machined 6mm Aluminum Linkage.
  • Front / Rear Sway Bar.

Drivetrain:

  • Full Metal Transmission Gears.
  • 4 Wheels Drive.
  • Center Shaft Drivetrain for More Power Transferred to the Wheels.
  • Hight Efficient Transmission System.
  • Wide Range Easy Changeable Gear Box Design.
  • Sealed Transmission Case.
  • Sealed Axle Housing.
  • Metal Planetary Gear Type Differential.

Gear Ratio:

  • Hi / Speed Ratio 1.56:1
  • Hi / Torque Ratio 2.8:1
  • Spur / Pinion Gear 32p85/32p12T
  • Ring & Pinion Gear30/15T 2:1

Wheel:

  • Official Licensed by KG1 Forged
  • KF004 Vile Wheel.
  • 66.50mm x 37.5mm.

Tires:

  • Official Licensed Fury Tires
  • Low Profile Country Hunter tires
  • 65 x 100.50 x 38.50 mm.

Specs:

  • F-250 Super Duty
  • 1/10 Scale 4 wheels Drive Lifted Custom Truck
  • Length: 25.6 inches (650mm).
  • Width: 10.04 inches (255mm).
  • Wheelbase: 16.02 inches (407mm).
  • Ground Clearance: 3.54inch (90mm).
  • Weight: 5.51 lb. 2.5 kg.
  • Battery Recommend : 2S 5000mah Lipo Battery with dean connector

#8992 – Ford F-250 SD KG1 Edition Lifted Truck Daytona Blue – RTR – $469.99
#8993 – Ford F-250 SD KG1 Edition Lifted Truck Burnt Copper – RTR – $469.99
Visit CENRacingUSA.com
See more posts about CEN Racing

CEN Racing Ford F250 SD KG1 Lifted Edition CEN Racing Ford F250 SD KG1 Lifted Edition CEN Racing Ford F250 SD KG1 Lifted Edition CEN Racing Ford F250 SD KG1 Lifted Edition CEN Racing Ford F250 SD KG1 Lifted Edition CEN Racing Ford F250 SD KG1 Lifted Edition CEN Racing Ford F250 SD KG1 Lifted Edition CEN Racing Ford F250 SD KG1 Lifted Edition CEN Racing Ford F250 SD KG1 Lifted Edition

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Updated: September 1, 2022 — 10:03 AM
Air Age Media © 2022