Castle Creations Mamba Micro X2 Sensored ESC & Motor Combos [VIDEO]

Castle Creations Mamba Micro X2 Sensored ESC & Motor Combos [VIDEO]

From Castle Creations:
We are welcoming 2022, CASTLE’S 25th YEAR OF OVERPOWERING RC, with the release of the completely refreshed MAMBA MICRO X2. Did you know that the original “Mamba” was Castle’s acclaimed entrance into the surface segment of RC in 2004, and legend has it, there are still a few in operation to this day? The Mamba power systems made plug-and-play, bolt-in brushless power available to the 1/18th scale car and truck markets for the first time ever.

We are excited to announce the next generation of brushless power for 1:18th racers and off-road fans, as well as the scale community. The MAMBA MICRO X2 takes full advantage of the improvements in Castle’s software technology and thermal cooling capabilities with the addition of CRYO-DRIVE™ as well as a sleek new lightweight/heat conducting, anodized aluminum case. These improvements mean the Micro X2 can gear more aggressively, for more speed and harder/longer runs, at a higher input voltage! That’s right, the MAMBA MICRO X2 now accepts up to 4S LiPo operation!

Also new to the Micro X2 is the addition of data logging. You will be able to record real-time data such as motor RPM, battery ripple, ESC and motor temperature, throttle input, and more. Performance data from Data Logging allows users to make setup adjustments to maximize both performance and battery life.

Castle Creations Mamba Micro X2 Sensored ESC & Motor Combos Castle Creations Mamba Micro X2 Sensored ESC & Motor Combos Castle Creations Mamba Micro X2 Sensored ESC & Motor Combos

Mamba Micro X, 16.8V, WP SENSORED ESC

Putting the X in Extreme!

The Mamba Micro X2 is a refresh of our popular 1:18 scale Mamba Micro X. This new ESC increases the maximum input voltage to 4s. We also added DATA LOGGING and our CRYO-DRIVE™ TECHNOLOGY; CryoDrive allows the ESC to run cooler and more efficiently at partial throttle. Like its predecessor, it boasts an 2 amp peak BEC,waterproof* and has SENSORED MOTOR SUPPORT. This is the perfect upgrade for 1:18th scale 2WD or 4WD vehicles up to 2.25 lbs. The Mamba Micro X also works well in some 1:10th scale crawlers for low speed operation (no rock racing/hill climbing). You can now purchase the Mamba Micro X2 Crawler Edition ESC paired with our Slate Crawler motors.

FEATURES:

  • Input Voltage range 2S-4S
  • Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
  • Waterproof design.
  • Sensored Motor capable (with optional sensor harness)
  • Convenient transmitter programming for six common adjustable settings.
  • Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately)
  • Telemetry Ready (Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters)
  • Auxiliary Wire Functionality allows for “on-the-fly” adjustments such as Max Power and Max Brake.
  • Audible Alerts that will notify you of possible issues with calibrations and error conditions.
  • Designed and manufactured in Olathe, Kansas and is backed by our 1-year warranty.

Mamba Micro X2 ESC Purchase Includes:

  • Mamba Micro X2 ESC with 3.5mm connectors
  • Coupon for free Castle Link USB adapter
  • Quick Start Guide
  • Castle Decals

#010-0169-00 – $89.95

Castle Creations Mamba Micro X2 Sensored ESC & Motor Combos Castle Creations Mamba Micro X2 Sensored ESC & Motor Combos Castle Creations Mamba Micro X2 Sensored ESC & Motor Combos

Mamba Micro X2, 16.8V, WP Sensored ESC With 0808 Motor Combo

Putting the X in Extreme!

The Mamba Micro X2 is a refresh of our popular 1:18 scale Mamba Micro X. This new ESC increases the maximum input voltage to 4s. We also added DATA LOGGING and our CRYO-DRIVE™ TECHNOLOGY; CryoDrive allows the ESC to run cooler and more efficiently at partial throttle. Like its predecessor, it boasts an 2 amp peak BEC,waterproof* and has SENSORED MOTOR SUPPORT (included 0808 is sensorless).

This is the perfect upgrade for 1:18 scale RC vehicles, up to 3S LiPo and weighing in at up to 2.25lbs. Vehicles include: Traxxas Slash 4×4 1/16th, Losi Mini-T 2.0, Traxxas LaTrax Rally, Traxxas LaTrax Teton, Axial Yeti Jr.

The Mamba Micro X also works well in some 1:10th scale crawlers for low speed operation (no rock racing/hill climbing). You can now purchase the Mamba Micro X2 Crawler Edition ESC paired with our Slate Crawler motors.

FEATURES:

  • Input Voltage range 2S-3S (with included 0808 motor)
  • Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
  • Waterproof design.
  • Convenient transmitter programming for six common adjustable settings.
  • Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App for Android or iOS and a B-LINK Bluetooth Adapter (sold separately)
  • Telemetry Ready (Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters)
  • Auxiliary Wire Functionality allows for “on-the-fly” adjustments such as Max Power and Max Brake.
  • Audible Alerts that will notify you of possible issues with calibrations and error conditions.
  • Designed and manufactured in Olathe, Kansas and is backed by our 1-year warranty.

Mamba Micro X2 w/0808-4100Kv Motor Purchase Includes:

  • Mamba Micro X2 ESC
  • 0808-4100Kv / 0808-5300Kv / 0808-5300Kv Brushless Sensorless Motor
  • Coupon for free Castle Link USB adapter
  • Quick Start Guide
  • Castle Decals

#010-0169-01 – Mamba Micro X2, 16.8V, WP Sensored ESC W / 0808-4100KV MOTOR – $124.95
#010-0169-02 – Mamba Micro X2, 16.8V, WP Sensored ESC W / 0808-5300KV MOTOR – $124.95
#010-0169-03 – Mamba Micro X2, 16.8V, WP Sensored ESC W / 0808-8200KV MOTOR – $124.95

Castle Creations Mamba Micro X2 Sensored ESC & Motor Combos

Mamba Micro X2, 16.8V, WP SENSORED ESC (4.0MM)

Putting the X in Extreme!

The Mamba Micro X2 is a refresh of our popular Mamba Micro X. This new ESC increases the maximum input voltage to 4s. We also added DATA LOGGING and our CRYO-DRIVE™ TECHNOLOGY; CryoDrive allows the ESC to run cooler and more efficiently at partial throttle. Like its predecessor, it boasts an 2 amp peak BEC,waterproof* and has SENSORED MOTOR SUPPORT.

This ESC is ideal for the weight conscious builder or where space is limited, used in low speed crawling or trail running in vehicles weighing up to 8lbs on 2s or 3s; it can also be used in slightly more aggressive setups like rock racing and extended hill climbing on vehicles up to 4lbs. Recommended motors include Castle’s “Slate” crawler motors (combos available) and Holmes Hobbies Puller Pro 540 “Stubby” (≤ 2700kv)

If you’re looking for a more aggressive setup in a heavier rig, like rock racing and extended hill climbing, we recommend you run the Mamba X ESC. Like its predecessor it includes improved features for rock crawling, including active drag brake and drag brake ramp.

Note: Use of an external BEC is required if running a high power or digital servo.

FEATURES:

  • Input Voltage range 2S-4S
  • Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
  • Waterproof design.
  • Sensored Motor capable
  • Convenient transmitter programming for six common adjustable settings.
  • Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App and a B-LINK Bluetooth Adapter (sold separately)
  • Telemetry Ready (Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters)
  • Auxiliary Wire Functionality allows for “on-the-fly” adjustments such as Max Power and Max Brake.
  • Audible Alerts that will notify you of possible issues with calibrations and error conditions.
  • Designed and manufactured in Olathe, Kansas and is backed by our 1-year warranty.

Mamba Micro X2 ESC Purchase Includes:

  • Mamba Micro X2 ESC with 4 mm Connectors
  • Sensor Harness
  • Coupon for free Castle Link USB adapter
  • Driver’s Ed and Quick Start Guide
  • Castle Decals

#010-0171-00 – $89.95

Castle Creations Mamba Micro X2 Sensored ESC & Motor Combos

Mamba Micro X2, 16.8V, WP Sensored ESC With 1406 Motor Combo

Putting the X in Extreme!

The Mamba Micro X2 is a refresh of our popular Mamba Micro X. This new ESC increases the maximum input voltage to 4s. We also added DATA LOGGING and our CRYO-DRIVE™ TECHNOLOGY; CryoDrive allows the ESC to run cooler and more efficiently at partial throttle. Like its predecessor, it boasts an 2 amp peak BEC,waterproof* and has SENSORED MOTOR SUPPORT.

This ESC and Motor Combo is ideal for the weight conscious builder or where space is limited, it is perfect for 1:10 scale low speed rock crawlers/trail runners on 3S-4S weighing less than 8lbs. It can also be used in more aggressive setups in lighter 1:10 scale touring cars, stadium trucks or buggies weighing up to 5lbs.

If you’re looking for a more aggressive setup in a heavier rig, like rock racing and extended hill climbing, we recommend you run the Mamba X ESC. Like its predecessor it includes improved features for rock crawling, including active drag brake and drag brake ramp.

Note: Use of an external BEC is required if running a high power or digital servo.

FEATURES:

  • Input Voltage range 2S-4S
  • Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
  • Waterproof design.
  • Sensored Motor capable
  • Convenient transmitter programming for six common adjustable settings.
  • Additional settings and software updates available via Windows®-based Castle Link software and USB adapter (coupon included with purchase) or the Castle Link App and a B-LINK Bluetooth Adapter (sold separately)
  • Telemetry Ready (Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters)
  • Auxiliary Wire Functionality allows for “on-the-fly” adjustments such as Max Power and Max Brake.
  • Audible Alerts that will notify you of possible issues with calibrations and error conditions.
  • Designed and manufactured in Olathe, Kansas and is backed by our 1-year warranty.

Mamba Micro X2 w/1406-1900Kv Purchase Includes:

  • Mamba Micro X2 ESC with 4 mm Connectors
  • 1406-1900Kv / 1406-2280Kv / 1406-2850Kv Sensored Motor
  • Sensor Harness
  • Coupon for free Castle Link USB adapter
  • Driver’s Ed and Quick Start Guide
  • Castle Decals

#010-0171-01 – Mamba Micro X2, 16.8V, WP Sensored ESC W / 1406-1900KV COMBO – $169.95
#010-0171-02 – Mamba Micro X2, 16.8V, WP Sensored ESC W / 1406-2280KV COMBO – $169.95
#010-0171-03 – Mamba Micro X2, 16.8V, WP Sensored ESC W / 1406-2850KV COMBO – $169.95

Visit CastleCreations.com
See more posts about Castle Creations

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: March 16, 2022 — 12:01 AM
Air Age Media ©