Pro-Line 2012 BullDog Clear Bodies For The CML C4.1 & TLR 8ight 2.0

Pro-Line 2012 BullDog Clear Bodies For The CML C4.1 & TLR 8ight 2.0

Pro-Line has released a 2012 BullDog body for the CML C4.1 and TLR 8ight 2.0. Check out the press release below for more info:

This is a BullDog Clear Body for the CML Centro C4.1 Buggy Conversion. Pro-Line understands how bodies affect performance, and with the C4.1 already dominating the Euro style Astro-turf, grass and indoor carpet tracks, Pro-Line has taken performance to an even higher level with the 2012 C4.1 Bulldog Body. This specially designed body wraps perfectly around the extremely narrow and sleek chassis featured on the C4.1 and completely clears the mid-motor transmission in the rear. Great care was taken in refining the BullDog design for 2012 to create even more stability with enhanced steering to gain an advantage on the track. The windshield is steeper to create more down force over the front wheels and the roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The roof has been lowered in the rear and fins have been added to achieve stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency. This is a must have body for the new Centro C4.1 Buggy Conversion!

What is the Centro C4.1? Read Below:

Based on the multiple World Championship winning Team Associated B4.1, the Centro converts the transmission to mid-motor and has been developed with the sole aim of continuing to beat the competition, particularly on higher grip tracks such as Astro-turf, grass and even indoor carpet and mixed surface.

Using an ultra slim black anodized chassis for saddle pack or ‘shorty’ Li-po cells, the C4.1 utilizes the race proven B4.1 suspension components and geometry to tame any track. The gearbox has four internal gears to maximize the mid-motor configuration, with the casing itself machined from delrin. The custom made rear hinge-pin mounts have the option of one or two degrees anti-squat.

With the parts included in the conversion you will have everything you’ll need (except for tuning weights) to make your B4.1 Factory Team into the same car Neil Cragg, Paul Bradby and Tom Yardy took to the national podium.

Please note:

All bodies are sold in crystal clear lexan and are painted for advertising purposes only. Body painted by Darkside Designs

Features:

  • Specifically Designed BullDog for C4.1
  • Improved performance for 2012
  • More stability and improved steering
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your Buggy

  • Made in the USA, since 1982

What’s Included:

  • 2012 BullDog Body (1 pc)
  • Undertray (1 pc)
  • Window templates
  • Decal Sheet

Fits:

  • CML Centro C4.1 Buggy (B4.1 Mid Motor Conversion)

3382-00 | 2012 BullDog Clear Body for CML Centro C4.1 $25.03

RC Car Action - RC Cars & Trucks | Pro-Line 2012 BullDog Clear Bodies For The CML C4.1 & TLR 8ight 2.0

 

 

 

 

 

 

2012 BullDog Clear Body for 8ight 2.0

This is a 2012 BullDog Clear Body for the TLR 8ight 2.0 Buggy. Pro-Line’s newest Factory Team driver Adam Drake is the man when it comes to racing and developing TLR 1:8 scales racing vehicles. It is more important than ever for Pro-Line to deliver the highest performing products for the TLR line of vehicles. We have achieved that with the highest performing body yet: 2012 BullDog body for the TLR 8ight 2.0 Buggy. The design incorporates the new BullDog styling for 2012 that creates even more stability with enhanced steering to gain an advantage on the track. The windshield is steeper to create more down force over the front wheels and the roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The rear of the roof has been lowered and fins have been added to achieve stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency. This is a must have body for the TLR 8ight 2.0 for the new racing season because of the enhanced performance and style!

Features:

  • 2012 BullDog performance & styling for your TLR buggy
  • More stability and improved steering
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your Buggy

  • Made in the USA, since 1982

What’s Included:

  • 2012 BullDog Body (1 pc)
  • Window templates
  • Decal Sheet

Fits:

  • TLR 8ight 2.0

3379-00 | 2012 BullDog Clear Body $25.88

[nggallery id=696]

If you like this article, check out this additional article on Pro-Line.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 21, 2015 — 4:40 PM
Air Age Media ©