Avid Xray T4 ’16 Aluminum Chassis

Avid Xray T4 ’16 Aluminum Chassis

From Avid:

The Xray T4 ’16 Aluminum Chassis is loaded with several unique features that we developed through the ’15. We recommend using this chassis to increase performance on high to medium bite conditions.


  • 7075-T6 (2mm) Aluminum anodized black, Avid logo laser etched, and silver edge highlights on both sides.
  • Cutouts added and existing diff cutouts enlarged to reduce weight and increase flex while being thoughtful to keep enough material on the sides for your speedo to hold with servo tape.
  • Battery tape on the bottom of the chassis has a cutout slot so it doesn’t interfere with ride height checks or drag on track.
  • Motor pocket width is decreased and is double pocketed to keep as much strength possible.
  • Motor mount flex control hole has been modified with a large bevel on top of chassis to prevent the screw head from hitting chassis.
  • 2mm thickness allows for lower CG and ability to lower roll centers more than stock.
  • Chassis shape is smoothed to keep droop screw platforms from digging into the track during hard cornering.
  • Chassis narrowed to 82mm allowing the chassis to roll deeper through a corner.
  • Recommend for use on high to medium bite conditions.

AV1629 – $75.00

Avid Xray T4 '16 Aluminum Chassis (1) Avid Xray T4 '16 Aluminum Chassis (2)



Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!


Updated: November 13, 2015 — 3:58 PM
Air Age Media ©