Traxxas  ProScale Peformance 900x250
Log In

Building the Associated TC6.1 Sedan

Associated sent me the TC6.1 sedan along with all the goodies that will be going in it.

It’s been a little while since I have reviewed an onroad car and with the brand spanking new Associated TC6.1 landing in my lap for a review, you could have guess that I am feeling more than ecstatic on getting this rig on the track. As with most serious racers, which includes me, I prefer a new car in kit form versus a RTR vehicle. Along with competing with your new race kit, building and knowing it inside and out is part of the whole RC experience that makes it truly enjoyable. I’m stoked to build the TC6.1 and I’m going to take you along for the ride. Lets get started!



With the TC6.1 all assembled, the only step left is to top it off with a race body and go hit the track. I plan on track testing the TC6.1 on asphalt and carpet tracks here in the SoCal area. Stay tuned and look for the full review on this killer sedan in a future issue of RC Car Action and if you’re a native to the SoCal area, I’ll see you at the track!  –  Joel Navarro

Updated: May 9, 2016 — 5:53 AM
Venom Pro 2 Charger 600x120
Gear Guide 2019


Add a Comment
  1. Hi!

    But with spur shaft I can share small tip.
    Just check if it is not too long or short.
    If long -> tweak chassis, need some file work on sand paper
    If short -> again tweak chassis, need to add small thin spacer!

    Shocks need aftermarket rubber blades, oryginal ones are too stiff 🙁 and from tc5 they are too small 🙁


  2. What type of battery strap are you using , I can’t find it

Leave a Reply to Pat Yarosh Cancel reply

Your email address will not be published. Required fields are marked *

Air Age Media © 2018
Assign a menu in the Right Menu options.
WordPress Image Lightbox