Absolute Hobbyz 900x250
Log In

Search Results for – "X-Factory"


X Factory E-Speed Motor Plate For All 4-Gear X-Factory Cars

X Factory E-Speed Motor Plate For All 4-Gear X-Factory Cars

X Factory and Ellis Stafford are proud to announce the new E-Speed Motor Plate to fit all 4-Gear X-Cars. Fresh from his dominating victory at the TLR Super Cup race, Ellis releases the newly designed motor plate to improve motor cooling and reduce bending. Made of 7075 aluminum, the new plate is stronger than the […]

Ads after 2 posts

Venom Unplugged 600x120

Ads after 6 posts

X-Factory topshaft for the X – 6 & 6 Squared, X – 60, and the B4 & T4

X-Factory topshaft for the X – 6 & 6 Squared, X – 60, and the B4 & T4

New from X-Factory:X Factory announces a new topshaft to fit their X – 6 & 6 Squared, X – 60, and the B4 & T4. The new shaft is individually C.N.C. machined from hardened steel and is a one-piece shaft. The #5210 topshaft offers several improvements. Because they are individually C.N.C. machined, the shaft is […]
X-Factory Carbon Fiber Body Reinforcement for X-60 Truck Body

X-Factory Carbon Fiber Body Reinforcement for X-60 Truck Body

New from X-Factory:X Factory announces a cool new carbon fiber part to reinforce the rear body clip area of the X – 60 body. Because the rear body clips are in a recessed spot, this area is naturally a weak spot on the body. The new C.F. part, #8260, spreads the stress over a larger […]

Ads after 2 posts

Ads after 6 posts

Kinwald sticks with X-Factory for ’08

  The Dirtinator is Trinity-powered again, but Brian Kinwald won’t be going old-school with a return to former sponsors Team Losi or Associated. X-Factory cars will remain Brian’s weapon of choice in 2008, with a truck on the way. We’ll keep you posted on the truck news; for now, here’s the official PR from X-Factory. BRIAN […]
X-Factory: Brian Kinwald returns to racing

X-Factory: Brian Kinwald returns to racing

Latest from www.xfactoryrc.com. BRIAN KINWALD RETURNS TO RACING Almost exactly two years after his illnesses became so unbearable that he had to leave in the middle of the 2005 Shoot-Out, Brian Kinwald has returned to active R/C racing. Not just to practice in private at a small track, but jumping straight into the middle of […]

Ads after 2 posts

Ads after 6 posts

Track Directory 600x120
X-Factory and Brian Kinwald announce “Dirtz Dialed Partz”

X-Factory and Brian Kinwald announce “Dirtz Dialed Partz”

BRIAN KINWALD & X FACTORY PROUDLY ANNOUNCE A NEW LINE OF HIGH QUALITY R/C PARTS AND ACCESSORIES: DIRTZ DIALED PARTZ For many years I’ve wanted to have my own line of parts, tools, and accessories. I’ve been a full-time professional R/C racer since I was 16 years old and there are so many things I […]
X Factory Now Offering Metric Bearings & Lower Prices

X Factory Now Offering Metric Bearings & Lower Prices

From X Factory: X Factory has always been your best supplier of U.S. size bearings to fit 1/10 electric off-road cars. Now we are adding the metric sizes you need for the newer metric dimensioned 1/10 cars. Wheel bearings, transmission bearings, outdrive bearings, and steering bearings. All good quality bearings at rock-bottom prices. Especially with […]

Ads after 2 posts

Ads after 6 posts

X Factory 4mm Hardware & Set Screws

X Factory 4mm Hardware & Set Screws

From X Factory: A major expansion of the great X Factory hardware line is here now: 4mm hardware and set screws found on most 1/8 scale cars. For many years X Factory has sold great little packs of hardware for R/C mechanics’ use in 4-40 and 3mm sizes. These fasteners generally fit 1/10 scale cars; […]
X Factory 14 Pack Grade 10 Carbide Diff Balls

X Factory 14 Pack Grade 10 Carbide Diff Balls

From X Factory: X Factory announces their great carbide diff balls now come in a pack of 14. Many modern 1/10 vehicles now use 14 balls in their diffs instead of the old 12. These 3/32” carbide balls are grade 10, which is a superior grade to most available. X Factory has long sold them […]

Ads after 2 posts

Ads after 6 posts

X Factory Infinity Dirt Spec Shock Towers For The XRAY XB2

X Factory Infinity Dirt Spec Shock Towers For The XRAY XB2

From X Factory: When X Factory released their Infinity parts for the X Ray XB2 something was missing: the dirt spec tower. Well, here it is! The Infinity dirt spec tower matches the X Ray geometry perfectly and bolts right up, but X Factory’s tower is stronger, stiffer, 4mm carbon fiber, less flexible than the […]
X Factory Infinity Shock Towers For The TLR 8ight 4.0

X Factory Infinity Shock Towers For The TLR 8ight 4.0

From X Factory: X Factory announces the latest addition to the Infinity line of upgrade parts, shock towers for the TLR 8ight 4.0. The X Factory towers match the latest TLR tower geometry precisely, and will fit any TLR 8ight buggy, nitro or electric. Made from U.S.-sourced 5mm carbon fiber in X Factory’s own facility, […]
Airage Media © 2018
WordPress Image Lightbox