RCCA Membership 900x250
Boost Login

Search Results for – "Locked Up RC"


Locked Up RC Slipper Eliminator Kit For The Axial SCX10 II

Locked Up RC Slipper Eliminator Kit For The Axial SCX10 II

From Locked Up RC: We have redesigned this kit for 2019 to not only eliminate your slipper, but also the slop that is commonly found in the stock setup! Tired of dealing with that Axial slipper clutch in your SCX10 II kit? Eliminate it with our new “Slipper Eliminator Kit“! WARNING Slipper elimination will cause […]
Locked Up RC Clamping Servo Arms

Locked Up RC Clamping Servo Arms

From Locked Up RC: These stout aluminum servo arms are perfect for any rock crawling steering setup! Features: Each arm is anodized black Includes a stainless steel M1.6 screw for a tight fit One hole located at 19.30mm from center is M3 threaded One hole located at 15.30mm form center is 2.5mm bore These arms […]

Ads after 2 posts

Boost Membership Inline 600x120

Ads after 6 posts

Locked Up RC 4-40 Mag Acorn Wheel Studs

Locked Up RC 4-40 Mag Acorn Wheel Studs

From Locked Up RC: Made to work with “SLW style” wheels, our 4-40 Acorn Wheel Studs give you a realistic “Acorn Nut” appearance for your wheel. These “Mag” units feature a smaller hex than our standard 4-40 wheels studs. This allows you to use a smaller size socket that will better fit into tight recesses […]
Locked Up RC M2 Acorn Wheel Studs now Available In Black

Locked Up RC M2 Acorn Wheel Studs now Available In Black

From Locked Up RC: Locked Up RC is happy to bring you our scale M2 Acorn Wheel Studs in black! These are a perfect accessory for all of our 8L style wheels that give you a realistic “Acorn Nut” appearance. Specifications: M2 x 6mm hardware Class 12.9 Black Finish Note: Requires a 3mm Hex Socket […]

Ads after 2 posts

Ads after 6 posts

Locked Up RC TRX-4 Black Steel Portal Knuckles

Locked Up RC TRX-4 Black Steel Portal Knuckles

From Locked Up RC: Our TRX-4 Black Steel Portal Knuckles help you add weight down low for a better overall COG. Most drivers will tell you that adding some weight down low is one of the best ways to improve performance in your truck. These knuckles weigh 88g but fit within the stock footprint. These […]
Locked Up RC 1.9″ TrailReady HD SLW Wide Black Lightweight Wheels

Locked Up RC 1.9″ TrailReady HD SLW Wide Black Lightweight Wheels

From Locked Up RC: Our 1.9″ TrailReady HD series wheels are the best looking scale replica wheel you will find on the market today. This version is wider than our standard wheels and is grooved around the exterior to reduce the weight. After machining this wheel receives our Cinder finish then is anodized black. This […]

Ads after 2 posts

Ads after 6 posts

Gear Guide 2019
Locked Up RC 1.9″ TrailReady HD SLW Wide Wheels

Locked Up RC 1.9″ TrailReady HD SLW Wide Wheels

From Locked Up RC: Our 1.9″ TrailReady HD series wheels are the best looking scale replica wheel you will find on the market today. This version is slightly wider than standard and will work with our 1.9″ Command rings. This wheel is designed to work with the Vanquish Products SLW 6 lug hub style and […]
Locked Up RC FI Spool For The Traxxas TRX-4

Locked Up RC FI Spool For The Traxxas TRX-4

From Locked Up RC: When designing a full traction differential replacement for the TRX-4 we wanted to make something indestructible, simple and cost effective. We also wanted a reasonable weight that still uses 3 bearings and of course offering a very, VERY tight fit to your axle shafts to eliminate slop. Lastly, we wanted “In […]

Ads after 2 posts

Ads after 6 posts

Locked Up RC Paintable 1.9″ SLW Golden Chromate Wheels

Locked Up RC Paintable 1.9″ SLW Golden Chromate Wheels

From Locked Up RC: After machining, this ring receives a golden chromate chemical film coating. The coating promotes paint and primer adhesion for those of you wanting to go with a custom paint job. The coating looks nice but is not as durable as hard coat anodizing. This wheel is designed to work with the […]
Locked Up RC Driveshaft Pinion Adapter For The Vaterra Ascender

Locked Up RC Driveshaft Pinion Adapter For The Vaterra Ascender

From Locked Up RC: Locked Up RC is happy to present our solution for those that are looking to bolt non-Vaterra driveshafts to their Vaterra Ascender. These adapters replace the stock pinion shaft (VTR232072 partial) with one that includes a 5MM shaft output. This will allow you run different length shafts for wheel base changes […]

Ads after 2 posts

Ads after 6 posts

Locked Up RC OT Shaft For The Traxxas TRX-4

Locked Up RC OT Shaft For The Traxxas TRX-4

From Locked Up RC: Locked Up RC is happy to present our solution for those that are looking for a stronger, reasonably priced, replacement rear axle shaft for their Traxxas TRX-4. OT shafts offer a torsional tensile strength rating of over 160in/lbs*. That is over 33% more than a typical stock shaft, which suffers destruction […]
Locked Up RC Pipe Brass Bushings For The Traxxas TRX-4

Locked Up RC Pipe Brass Bushings For The Traxxas TRX-4

From Locked Up RC: These brass bushings offer a thicker body and slightly smaller inner diameter compared to stock Traxxas parts (8232). These features minimize play between your CHub and Knuckle for both new and old parts. This also means that they will be an extremely tight fit and may require some break in for […]
Air Age Media © 2019
RC Car Action
WordPress Image Lightbox