Project Drag Slash Custom Build [VIDEO]

From Traxxas:
Tools Used:

• 1.5mm, 2mm, & 2.5mm hex tools
• 5.5mm & 7mm nut drivers
• Needle nose pliers
• Hobby knife
• Electric drill
• 2mm, 2.5mm, & 1/8in drill bits
• Body reamer
• RC body paint
• RC tire glue
• All-purpose cleaner
• 4mm wrench
• Small flathead screwdriver
• Side cutters
• RC body scissors (curved & straight)
• U-joint wrench
• Sheet of paper (for painting)
• Permanent marker (to mark position for OBA speakers)
• Table vise
• Dremel tool with cutting disk and sanding drum
• Microfiber cloth
• Safety glasses

Wear proper safety goggles and use caution when working with rotary tools or general hobby tools. This project build should only be performed with the supervision of a responsible and knowledgeable adult.

Learn More: https://traxxas.com/news/custom-drag-slash
Visit Traxxas.com
See more posts about Traxxas

Subscribe today with a Digital Edition subscription or Print + Digital combo!