From Exotek Racing:
Machined 81 Spur Gear And Mounting Plate
Heavy duty machined spur gear with alloy mounting plate for the stock EB410 center gear diff. The much stronger machined delrin spur gear reduces the chances of stripped gears and includes the machined 7075 mounting plate with hardware.
The 2 piece design also makes for quick and easy spur gear changes- you do not have to open the gear diff and remove the outdrive, or refill the oils etc.
The alloy mounting plate also provides cooling of the diff fluid for more consistent diff action.
A 81t spur gear is included and the alloy mount also works with our optional 72t 1498 spur.
#1798 – $21.95 MSRP
Bulkhead Saver Camber Plate
Heavy duty machined 7075 camber plate that strengthens the front bulkhead against breakages at the shock tower.
By adding mounting points to the 2 diff cover holes this will help prevent snapping the 2 upper bulkhead screws off of the bulkhead.
Includes 2 longer M3 screws as well and the HD camber plate bolts right on to the stock shock tower or 4mm thick carbon shock towers with no modifications needed.
Note- to open the diff cover you will need to loosen the 6 camber plate screws as well.
#1810 – $14.95 MSRP
Flite 75t Center Spool Set For 17.5 And 13.5 Spec Classes
Ultra light weight center spool set for the EB410. Greatly reduces the rotating mass of your EB410 for that extra boost in 13.5t and 17.5t spec racing. The Exotek spool set weighs 18gr with the spur gear and the included coated steel outdrive cups.
Machined 75t pom spur gear is included (replacement spur gears #1545) and bolts on to the lightweight alloy spool.
For non-boosted 13.5 or 17.5 classes only.
Also compatible with Exotek spur gears or standard 48p Kimbrough spur gears #144 , #145, etc.