Tekin Releases Redline GEN3 1:10 Brushless Motors

Tekin Releases Redline GEN3 1:10 Brushless Motors

The guys at Tekin teased us a bit at the ROAR Electric Off-Road Nationals and gave us a quick glimps of their new motor and now it’s heading to hobby shop shelves. With features like a machined aluminum can, anodized end bell, dual-plug sensor wire harness and high RPM precision bearings you can’t go wrong. Look below for more information on Tekin’s new Redline GEN3 brushless motor.

tekin-redline-gen3-brushless-motors-1

From Tekin:

Tekin’s third generation motors are re-engineered from the ground up resulting in a smaller, lighter and faster sensored motor. On Road or Off, the new GEN3 handles the task in stride, delivering the smooth power across all RPMs that you’ve come to expect from a Tekin motor. Much more than a re-hash and new look, the GEN3 Redline Sensored Motor is now ready for any situation and able to create the speed you need to win.

The GEN3 21.5T, 17.5T and 13.5T are available in an RPM version as well as the standard versions. Designed for applications where higher RPM is more beneficial than torque, these motors are perfect for 1/12 and touring car racing classes.

The GEN3 modified group of motors are custom tuned with rotor sizes to give you the performance needed for your application. The 21.5T down to 8.5T group come standard with 12.5mm performance rotors and the 7.5T to 2.5T group are equipped with a 13mm rotor for that extra torque needed in modified racing.

Features:

  • CNC Machined T 6061 Billet Aluminum Heat Sink Can
  • Neodymium Sintered Magnet
  • Precision Engineered for Maximum Energy Conversion
  • High Purity Copper Windings Maximize Conductivity
  • Low Resistance, High Power Solder Tabs
  • Dual-Plug Sensor Wire Harness for all Sensored and Sensorless systems
  • Anodized End-bell plates maximize corrosion and wear resistance
  • High RPM precision bearings
  • Rebuild-able Design
  • Solder-less Sensor PCB replacement
  • Adjustable Timing
  • Standard and RPM versions

Specs:

Input Voltage: 2S – All | 3S – 10.5 and up
Weight: 158g / 5.6oz
Shaft Dimensions: 3.2mm (1/8″) x 15.3mm
Motor Diameter: 35.85mm / 1.40″
Motor Length: 48.5mm / 1.909″
Bearing Dimensions: Front: 4x13x5mm / Rear: 1/8×3/8×5/32″
Rotor Size: 12.3mm – 25.5T | 12.5mm – 21.5T rpm* / 17.5T rpm / 13.5T rpm / 21.5T / 17.5T / 13.5T / 10.5T / 9.5T / 8.5T | 13mm – 7.5T / 6.5T / 5.5T / 4.5T / 4T / 3.5T / 2.5T
Rebuildable: Yes

Available Configurations:

MOTOR ONLY

TT2701 – GEN3 25.5T
TT2702 – GEN3 21.5T RPM
TT2703 – GEN3 21.5T
TT2704 – GEN3 17.5T RPM
TT2705 – GEN3 17.5T
TT2706 – GEN3 13.5T RPM
TT2707 – GEN3 13.5T
TT2708 – GEN3 10.5T
TT2709 – GEN3 9.5T
TT2710 – GEN3 8.5T
TT2711 – GEN3 7.5T
TT2712 – GEN3 6.5T
TT2713 – GEN3 5.5T
TT2714 – GEN3 5T
TT2715 – GEN3 4.5T
TT2716 – GEN3 3.5T
TT2717 – GEN3 2.5T

RS SPEC SYSTEMS

TT2740 – RS SPEC + GEN3 21.5T RPM
TT2741 – RS SPEC + GEN3 21.5T
TT2742 – RS SPEC + GEN3 17.5T RPM
TT2743 – RS SPEC + GEN3 17.5T
TT2744 – RS SPEC + GEN3 13.5T RPM
TT2745 – RS SPEC + GEN3 13.5T

RS GEN2 SYSTEMS

TT2730 – RS GEN2 + GEN3 21.5T RPM
TT2731 – RS GEN2 + GEN3 21.5T
TT2732 – RS GEN2 + GEN3 17.5T RPM
TT2733 – RS GEN2 + GEN3 17.5T
TT2734 – RS GEN2 + GEN3 13.5T RPM
TT2735 – RS GEN2 + GEN3 13.5T
TT2736 – RS GEN2 + GEN3 10.5T
TT2737 – RS GEN2 + GEN3 9.5T
TT2738 – RS GEN2 + GEN3 8.5T

RSX SYSTEMS

TT2750 – RSX + GEN3 8.5T
TT2751 – RSX + GEN3 7.5T
TT2752 – RSX + GEN3 6.5T
TT2753 – RSX + GEN3 5.5T
TT2754 – RSX + GEN3 4.5T
TT2755 – RSX + GEN3 3.5T
TT2756 – RSX + GEN3  2.5T

[nggallery id=1381]

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: September 9, 2015 — 3:10 PM
Air Age Media ©