Tamiya Options Parts For The TA-07 Pro On-Road Touring Car

Tamiya Options Parts For The TA-07 Pro On-Road Touring Car

From Tamiya:

Tamiya Options Parts For The TA-07 Pro On-Road Touring Car (1)

Tamiya Options Parts For The TA-07 Pro On-Road Touring Car (2)

TA07 Carbon Fiber Reinforced A-Parts (Bulkheads)

These are carbon fiber-reinforced nylon resin A-parts for the Tamiya TA-07 on-road chassis kit. The stock parts from the original kit are made of fiberglass reinforced plastic, which are softer and exhibit flex under load. Use these carbon reinforced parts to stiffen the chassis, which will improve performance under high-traction conditions, such as carpet race tracks or very high traction asphalt surfaces. The parts package contains front and rear bulkhead, gear cover, motor mount post, steering arm parts and more.

  • TA07 A Parts Sprue x1
  • Carbon-fiber reinforced parts improve performance on high-grip carpet and asphalt surfaces. Tuning Tip: Use kit supplied parts for low traction conditions.
  • Compatible with TA07 PRO chassis.
  • It’s recommended to use Item 54232 RC M3x0.5mm Thread Forming Tap to pre-tap screw holes.

54743 – MSRP: $14.00
Availability: February 2017

Tamiya Options Parts For The TA-07 Pro On-Road Touring Car (4)

Tamiya Options Parts For The TA-07 Pro On-Road Touring Car (6)

Tamiya Options Parts For The TA-07 Pro On-Road Touring Car (5)

TA07 Carbon Fiber Reinforced K Parts (Stiffeners)

These are carbon fiber-reinforced nylon resin K-parts for the Tamiya TA-07 on-road chassis kit. The stock parts from the original kit are made of fiberglass reinforced plastic, which are softer and exhibit flex under load. Use the carbon reinforced parts to stiffen your TA-07 machine under track conditions that have high traction, such as carpet or high traction asphalt. The parts package contains various stiffener parts which adjust the chassis rigidity. Use in combination with the kit supplied FRP parts to alter chassis flex characteristics to various degrees.

  • TA07 K-Parts Sprue x1
  • Carbon-fiber reinforced parts improve performance on high-grip carpet and asphalt surfaces. Tuning Tip: Use kit supplied parts for low traction conditions.
  • Compatible with TA07 PRO chassis.
  • It’s recommended to use Item 54232 RC M3x0.5mm Thread Forming Tap to pre-tap screw holes.

54744 – MSRP: $13.00
Availability: February 2017

Tamiya Options Parts For The TA-07 Pro On-Road Touring Car (7)

Tamiya Options Parts For The TA-07 Pro On-Road Touring Car (8)

TA07 Carbon Fiber Reinforced Lower Deck

This is a carbon fiber-reinforced nylon resin version of the kit supplied FRP (Fiberglass Reinforced Plastic) TA07 lower deck. Use this chassis in combination with stock FRP and Hop-Up Option carbon-reinforced parts to alter the TA-07’s chassis flex characteristics. By doing so you can fine tune the TA-07 machine to match the conditions of your racing surface.

  • TA07 Lower Deck x1
  • Carbon-fiber reinforced deck improves performance on high-grip carpet and asphalt surfaces. Tuning Tip: Use kit supplied parts for low traction conditions.
  • It’s recommended to use Item 54232 RC M3x0.5mm Thread Forming Tap to pre-tap screw holes.

54745 – MSRP: $37.00
Availability: February 2017

Tamiya Options Parts For The TA-07 Pro On-Road Touring Car (9)

RC M3x0.5mm Thread Forming Tap

This Thread Forming Tap is perfect for use with R/C bathtub chassis and plastic parts. This tool will enable smoother assembly by pre-tapping the plastic parts.

  • 3mm M3x0.5 Thread Forming Tap x 1pc.
  • Diameter: 3mm, Pitch: 0.5mm.
  • Comes with a plastic case for storage.
  • Use with Item 74086 Modeling Drill Chuck.
  • Cannot be used for tapping screws and counter-rotation screws.

54232 – MSRP: $20.00
Availability: NOW
Visit TamiyaUSA.com
See more posts about Tamiya

Tamiya Options Parts For The TA-07 Pro On-Road Touring Car (3)
rc-car-action-gear-guide

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: January 16, 2017 — 10:17 PM
Air Age Media ©