Hobbico AARMA Talion 900x250
Log In

Serpent S100 LTR 1/10 Pan Car Kit

Serpent S100 LTR 1/10 Pan Car Kit

1234580002b 1234579988b 1234579994b

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

From Serpent:

Serpent S100 LTR pan car 1/10 Main developments for the S100- LTR version – Wider carbon chassis, versatile for different layouts – steering blocks with inserts – unique friction free central pivot system – Serpent light and long RCCX pan car shock – pivot link steering system – servo position ( more layouts possible) – redesigned rear pod plate and lighter alu rear brackets – lower center of gravity

The Serpent S100 LTR is the next evolution of the S100 platform which is developed together with the input from our  Serpent pan car team-drivers.

Main developments for the S100- LTR version:

  • Wider carbon chassis, versatile for different layouts
  • steering blocks with inserts
  • unique friction free central pivot system
  • Serpent light and long  RCCX pan car shock
  • pivot link steering system
  • servo position ( more layouts possible)
  • redesigned rear pod plate and lighter alu rear brackets
  • lower center of gravity

Rear motor pod, chassis

The strong basis is formed  by the 2.5mm thick carbon fiber chassis plate with supports enabling a forward or backward battery position,  and enough space for all the valuable electronics.

The newly designed motor pod   is a beautiful combination of high quality machined alu brackets and top quality carbon fiber parts, bolted together to create an ultra-stiff rear pod.  The  motor-bracket allows the brushless motor to be mounted in the optimal position for car balance and offers good heat dissipation as well .

Central shock absorber

To aid rear traction under acceleration and to absorb bumps, the S100 Link sports a centrally mounted shock absorber. Supplied with a soft spring, the pre load of which can be adjusted, the front mount of this shock absorber is used for adjusting the rear down stop and range of movement between the chassis and motor pod.

Rear ball differential

The S100 Link comes supplied with a durable and high performance ball differential. Easily adjusted by a plastic nut, accessible through the right rear wheel, the differential  uses high quality steel balls and plates and is supplied with both suitable silicone and graphite grease for use during assembly and maintenance.

The rear ball-differential features hardened D-plates and carbon shaft assembly for super smooth diff action.

Rear axle mounts

The lightweight graphite rear axle is mounted on bearings that sit within eccentric composite inserts that allows the user to quickly and easily change the rear ride height of the car simply by changing between inserts.
The kit comes supplied with all 9 inserts which range between 0 and 4mm, each differing by 0.5mm and all are reversible for an even wider range of adjustment.

Battery mounts

On the S100 WGT Link, the Lipo’s can be mounted in 3 different positions by simply changing the composite battery  mounting position, perfect for adjusting the cars weight distribution.  The S100-LTR can be fitted with a short or long battery.

Bumper

The S100-LTR features a low carbon fiber bumper plate, with on top of that a strong and durable shaped front bumper.

Body post

For securely mounting the body shell to your S100 Link, the car has strong plastic body posts front and rear. All 4 posts are supplied with orange anodized adjustable collars to precisely adjust the body’s height and the posts are supplied extra-long to allow the user to cut them to their own preferred length. The front body posts have also been designed to help protect the front of the carbon chassis from splitting in the event of a heavy front impact.

Side-springs

In the  S100 LTR you can mount the springs in the original outer positon, or in the new more inside position.

Tube system

The S100-LTR uses the same tube-system as on the S120-LTR. Precision machined aluminum coated tubes connected with small ball-links.  This system plays a big part in how the car turns into a corner which can be adjusted through the use of different oils .

Central section

The central section is a combination of elements to control the movements of the rear end perfectly:

a central main shock, based on the famous Serpent RCC technology
2 spring loaded shaped side bars
the tube system

These elements interact to create the best possible handling (roll, bump and alignment) under all grip-conditions.

The new innovative pivot-system which connects the rear pod with the main chassis allows for full free movement of the 2 main parts, thus avoiding any binding, enabling the side-links to work optimally.  With small shims the ride-height can be easily changed.

Servo saver

The S100 WGT comes supplied with a high quality miniature servo saver, which through the use of orange anodized shims, has adjustable Ackermann.
The kit includes 3 alu servo posts to select from,  which enable  perfectly centered mounting  of any popular brand servo.

Pivot steering system / servo mounting

In the kit you will find 2 steering system options:

 

  • The new ball raced pivot link system with the servo on its side in longitudinal  direction, mounted with 2 small and light servo brackets.
  • The standard alu servo post with micro servo saver.  The alu servo posts have eccentric holes, so any brand servo can be centered properly

Steering blocks

The new steering blocks  feature and adjustable  king pin inclination with  easily changed  inserts, which are all 4 included

Upper front arm

Newly designed stiff composite front upper arms with pivot ball and threaded rod fixture.

Front end

The front end of the car features 11 different adjustments to help you get the most from your car, all of which are easy to adjust and measure. Fixed lower suspension arms are themselves damped by the central strut which uses rubber o-rings to take up the flex in this area, while the grey anodized aluminum front upper wishbone mounts are available in different caster angles, the car being supplied with 6 degree version as standard. With the steering block kingpins spring loaded, the cornering forces are channeled through the upper wishbone, which enable the car to corner at high speeds.

Chassis

The 1/10 scale S100 LTR pan car  chassis uses a new design  2.5mm thick carbon fiber chassis plate, a small and light top-deck, battery holder,  the rear pod plate and x-shape rear carbon bracket.

Packaging & Manual

The S100 LTR is sold in a very compact black box. To allow you to build your car with the greatest of ease, Serpent offers a full color online PDF instruction manual and integrated reference guide section that contains all the exploded views and latest options. The S100 link also comes supplied with a pair of Serpent decal sheets in black and white.

#410052

Updated: December 15, 2015 — 10:43 AM
Traxxas Mustang  600x120
RC 4x4 600x120

Leave a Reply

Your email address will not be published. Required fields are marked *

Airage Media © 2017
WordPress Video Lightbox Plugin