RPM Front & Rear A-Arms For 1/10 ARRMA Vehicles

RPM Front & Rear A-Arms For 1/10 ARRMA Vehicles

From RPM:

RPM Front & Rear A-Arms For 1_10 ARRMA Vehicles (1)

RPM is synonymous with strength and durability, plus we’re known for taking the extra steps to design unique parts worthy of your favorite ride. That’s why we’re releasing these front upper and lower A-arms for the ARRMA 1:10 scale line of vehicles. Our A-arms are stronger than stock and much beefier to help survive those out of control moments.

In addition, we’ve dramatically reduced the amount of slop in the suspension system at the hinge pins. This reduction in slop improves the caster, camber and toe angles, making them more consistent and makes your vehicle easier and more predictable to drive.

Each package comes with 2 upper A-arms and 2 lower A-arms, enough to complete the entire front end of your favorite ARRMA 1:10 scale vehicle. RPM A-arms are manufactured from our incredibly tough blend of engineering grade nylons for A-arms that will outlast virtually every other part on your car!

Tech Notes: RPM Front A-arms replace the front A-arms from AARMA #330225. Caution: RPM Front Lower A-arms will not work with certain inner (bulkhead) hinge pins that require a separate hinge pin retaining screw. They will only work with threaded style hinge pins. These arms work with most variations of the Granite, Vorteks, Raider, Fury & Mojave, including BLS, BLX and Mega versions.

#81392 – Front Upper & Lower A-arms for the ARRMA Granite, Vorteks, Raider, Fury & Mojave – $14.95

RPM Front & Rear A-Arms For 1_10 ARRMA Vehicles (2)
You’re tired of breaking stock rear A-arms, right? It usually happens when you’re at your favorite bash spot and there isn’t a hobby store within 50 miles too. That’s why we came up with our rear A-arms for the ARRMA 1:10 scale line of vehicles. Our A-arms are stronger than stock and much beefier to help survive those out of control moments.

In addition, we’ve dramatically reduced the amount of slop in the rear suspension system. This reduction in slop improves the camber and toe angles, making them more consistent and makes your vehicle easier and more predictable to drive.

Each package comes complete with both rear A-arms. RPM A-arms are stock replacement parts and are manufactured from our incredibly tough blend of engineering grade nylons for A-arms that will survive out there where everything else would fail!

Tech Notes: RPM Rear A-arms replace the rear A-arms from AARMA #330225. These arms work with most variations of the Granite, Vorteks, Raider, Fury & Mojave, including BLS, BLX and Mega versions.

#81452 – Rear A-arms for the ARRMA Granite, Vorteks, Raider, Fury & Mojave – $10.95

Visit RPMRCProducts.com
See more posts about RPM

Subscribe today with a Digital Edition subscription or Print + Digital combo!

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 15, 2017 — 1:02 AM
Air Age Media ©