RPM Front Bumpers For The Team Associated B6 & B6D

From RPM:

Everyone knows the Team Associated B6 & B6D is a racing machine but you can’t always hit the track to do your testing and, admit it, you know you like to drive it everywhere! When you’re off the track and want a bit more front-end protection than what the stock (or even the RPM Mini Front Bumper – RPM #81352) can provide, we have the solution – the RPM Wide Front Bumper. This bumper provides the maximum amount of protection you can get with a minimum amount of weight. Each bumper spans a full 4-1/2” (114mm.) and extends in front of the chassis by 1.5” (38mm.) on a 45° angle. Each RPM B6 & B6D Front Bumper also extends below the level of the chassis by 0.02” (.5mm) to help reduce the amount of scuffing and damage taken to the front of the stock aluminum chassis plate.

RPM Wide Front Bumpers for the B6 & B6D are extremely lightweight, weighing in at a meager 10.5 grams. RPM bumpers are super tough and the most durable and impact-absorbing bumpers on the market. Each bumper is also backed by our limited lifetime warranty against breakage. Protect that awesome race machine with a proven performer.

#81272 – Wide Front Bumper for the Associated B6 & B6D – $8.95

The Team Associated B6 & B6D is a race-bred machine built to dominate the track. However, it has no provisions for those “oops” moments that invariably happen. That’s where we step in! Our Mini Front Bumper replaces the stock hinge pin retainer (it is not a bumper) and provides roughly 1” (25mm) of forward extension and nearly 2” (49mm) of width to help protect the front end of the vehicle. That means direct frontal impacts won’t transfer 100% of that damaging impact energy into the front bulkhead / chassis / shock tower. Instead, our bumper will absorb a huge amount of that energy, making sure you can continue to compete instead of being pulled off the track by the turn marshal.

Each RPM B6 & B6D Front Bumper also extends below the level of the chassis by 0.02” (.5mm) to help reduce the amount of scuffing and damage taken to the front of the stock aluminum chassis plate.

RPM Mini Front Bumpers for the B6 & B6D are extremely lightweight, weighing in at a mere 7.5 grams. RPM bumpers are extremely strong and some of the most durable and impact-absorbing bumpers on the market. Each bumper is backed by our limited lifetime warranty against breakage. Protect that awesome race machine with a proven performer.

#81352 – Mini Front Bumper for the Associated B6 & B6D – $5.95
Visit RPMRCProducts.com
See more posts about RPM

Subscribe today with a Digital Edition subscription or Print + Digital combo!