Pro-Line Pre-Assembled Pro-Spline HD Axles And Replacement Parts

Pro-Line Pre-Assembled Pro-Spline HD Axles And Replacement Parts

From Pro-Line:

6273-00-1 - Copy

Front Pro-Spline HD Axles For The Traxxas Slash 4×4, Stampede 4×4 And Rally

This is a Front Pro-Spline HD Axle pack for Slash® 4×4, Stampede® 4×4 and Rally. Pro-Line is proud to introduce the pre-assembled Pro-Spline HD Axles for the front of the Slash® 4×4, Stampede® 4×4 and Rally! The Pro-Spline HD Technology debuted on the Pro-Line PRO-MT Kit and is designed to handle some serious power. Made from Hardened Black Oxide coated Steel, the Pro-Spline drive shafts have a true 6-sided spline that slides smoothly throughout the suspension travel without having to worry about stripping out like the stock plastic drive shafts. The Front Pro-Spline HD Axles feature an improved front outer pivot point, which has been moved to be in-line with the steering axis (king pin). This eliminates the forward and backward motion of the stock drive shafts when turning the wheels and results in more consistent power delivery during cornering.

The pins are held in place by zinc coated snap rings and M3 set screws on both ends (PRO Tip: Rotate snap ring so slit is away from the pin and put a drop of Tire Glue on the slit in the snap ring to prevent it from rotating. It is still removable with a flat-head screw driver). To top it all off the Front Pro-Spline HD Axles are Pre-Assembled to get you back to bashing faster than ever!

If you are looking for the Ultimate drive shaft Upgrade for the front of your Slash® 4×4, Stampede® 4×4 or Rally then look no further than the Front Pro-Spline HD Axles brought to you by Pro-Line!

Features:

  • Made from Hardened Black Oxide Coated Steel
  • True 6-Sided Sliding Spline for Smooth Suspension Action
  • Improved 4×4 Front Pivot Geometry
  • Zinc-coated Snap Rings hold the Pins in Place
  • No More Stripping Plastic Shafts
  • More Consistent Power Delivery during Cornering
  • Lay Down Some Serious Power
  • Ultimate Drive Shaft Upgrade
  • 4×4 Rear Pro-Spline HD Axles Also Available
  • Conveniently Pre-Assembled – Just Install & Go

What’s Included:

  • Pre-Assembled Front Pro-Spline HD Axles (2 pcs)
  • Which includes the following (Replacement Reference):
  • Front Pro-Spline HD Axles (6273-02)
  • 4×4 Male Drive Shafts (6273-04)
  • PRO-MT Drive Pins & Clips (6262-07)
  • PRO-MT Replacement Outdrives (6262-08 x 2 pcs)
  • PRO-MT Replacement Female Drive Shafts (6262-09 x 2 pcs)

Fits:

  • Traxxas® Slash® 4×4
  • Traxxas® Stampede® 4×4
  • Traxxas® Rally

#6273-00-$56.95 (MAP)

6273-01 - Copy

Rear Pro-Spline HD Axles For The Traxxas Slash 4×4, Stampede 4×4, Slash 2wd, Stampede 2wd, Electric Rustler And Rally

This is a Rear Pro-Spline HD Axle pack. Pro-Line is proud to introduce the pre-assembled Pro-Spline HD Axles for the rear of the Slash® 4×4, Stampede® 4×4, Slash® 2wd, Stampede® 2wd, Electric Rustler and Rally! The Pro-Spline HD Technology debuted on the Pro-Line PRO-MT Kit and is designed to handle some serious power. Made from Hardened Black Oxide coated Steel, the Pro-Spline drive shafts have a true 6-sided spline that slides smoothly throughout the suspension travel without having to worry about stripping out like the stock plastic drive shafts.

The pins are held in place by zinc coated snap rings and M3 set screws on both ends (PRO Tip: Rotate snap ring so slit is away from the pin and put a drop of Tire Glue on the slit in the snap ring to prevent it from rotating. It is still removable with a flat-head screw driver). To top it all off the Rear Pro-Spline HD Axles are Pre-Assembled to get you back to bashing faster than ever!

If you are looking for the Ultimate drive shaft Upgrade for the rear of your Traxxas Truck then look no further than the Rear Pro-Spline HD Axles brought to you by Pro-Line!

Features:

  • Made from Hardened Black Oxide Coated Steel
  • True 6-Sided Sliding Spline for Smooth Suspension Action
  • Zinc-coated Snap Rings hold the Pins in Place
  • No More Stripping Plastic Shafts
  • Lay Down Some Serious Power
  • Ultimate Drive Shaft Upgrade
  • 4×4 Front Pro-Spline HD Axles Also Available
  • Conveniently Pre-Assembled – Just Install & Go

What’s Included:

  • Pre-Assembled Rear Pro-Spline HD Axles (2 pcs)
  • Which includes the following (Replacement Reference):
  • Rear Pro-Spline HD Axles (6273-03)
  • 4×4 Male Drive Shafts (6273-04)
  • PRO-MT Drive Pins & Clips (6262-07)
  • PRO-MT Replacement Outdrives (6262-08 x 2 pcs)
  • PRO-MT Replacement Female Drive Shafts (6262-09 x 2 pcs)

Fits:

  • Traxxas® Slash® 4×4
  • Traxxas® Stampede® 4×4
  • Traxxas® Slash® 2wd
  • Traxxas® Stampede® 2wd
  • Traxxas® Electric Rustler®
  • Traxxas® Rally

#6273-01-$56.95 (MAP)

6273-02 - Copy

Replacement Front Pro-Spline HD Axle

This is a Replacement Front Pro-Spline HD Axle.

Made from Hardened Black Oxide coated Steel the Pro-Spline HD Axle is designed to handle some serious power!

If you need a Replacement or Spare Axle for your 4×4 Front Pro-Spline HD Axle kit (#6273-00) then this is the replacement kit for you!

Includes 1 replacement Front Axle.

Features:

  • Made from Hardened Black Oxide coated Steel
  • Designed to Handle Some Serious Power
  • Replacement Front Axle for 6273-00 Kit

What’s Included:

  • Replacement Front Pro-Spline HD Axle for 6273-00 (1 pc)

Fits:

  • Front Pro-Spline HD Axle #6273-00

#6273-02 –     $11.01

6273-03 - Copy

Replacement Rear Pro-Spline HD Axle

This is a Replacement Rear Pro-Spline HD Axle.

Made from Hardened Black Oxide coated Steel the Pro-Spline HD Axle is designed to handle some serious power!

If you need a Replacement or Spare Axle for your Rear Pro-Spline HD Axle kit (#6273-01) then this is the replacement kit for you!

Includes 1 replacement Rear Axle.

Features:

  • Made from Hardened Black Oxide coated Steel
  • Designed to Handle Some Serious Power
  • Replacement Rear Axle for 6273-01 Kit

What’s Included:

  • Replacement Rear Pro-Spline HD Axle for 6273-01 (1 pc)

Fits:

  • Rear Pro-Spline HD Axle 6273-01

#6273-03 –     $11.01

6273-04 - CopyReplacement 4×4 Male Shaft For 6273 Pro-Spline Axles

This is a Replacement Male Shaft for the 6273 Pro-Spline HD Front and Rear Axles.

Made from Hardened Black Oxide coated Steel, the Pro-Spline drive shafts have a true 6-sided spline that slides smoothly throughout the suspension travel without having to worry about stripping out like the stock plastic drive shafts.

If you need a Replacement or Spare Male Drive Shaft for the 6273-00 or 6273-01 Axle kit then this is the kit for you!

Includes 1 replacement Male Shaft.

Features:

  • Made from Hardened Black Oxide coated Steel
  • Replacement male shaft for 6273-00 & 6273-01 Kits

What’s Included:

  • Replacement Male Shaft for 6273 Front and Rear Pro-Spline HD Axles (1 pc) )

Fits:

  • Front and Rear Pro-Spline HD Axles

#6273-04 –     $14.41

[nggallery id=1369]

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: August 18, 2015 — 4:51 PM
Air Age Media ©