Pro-Line Late April RCX Releases

Pro-Line Late April RCX Releases

Pro-Line is debuting a ton of new gear at RCX this weekend, but you can see some of it starting today. Check out all the new wheels, tires, bodies, and more in the press release below:

This is a Toyota Tundra Clear Body for Short Course trucks. Attention all Toyota fans! Pro-Line has finally delivered the meanest body ever created for your Short Course truck: The Toyota Tundra. The Bold Toyota front grille screams for intense off-road action and tells everyone to get out of your way! The huge fenders allow clearance for the biggest and baddest Pro-Line tires and will give your truck the tough look you have been waiting for. The Toyota Tundra body features the latest in Pro-Line Flo-Tek technology with tons of air-vents that will keep your truck flying low and stuck to the track. This highly anticipated Short Course body is the only officially licensed Toyota Tundra body available and is brought to you by Pro-Line. Be the first at your track to represent Toyota and buy one for yourself today!

Features:

  • Intense Toyota Tundra Short Course styling
  • Flo-Tek technology specifically designed to minimize parachute effect
  • Bolt on modular number and side dam plates
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your truck

  • Made in the USA, since 1982

What’s Included:

  • Toyota Tundra Clear Body (1 pc)
  • Number and side dam plates (4 pcs)
  • Aluminum Hardware Pack
  • Window templates
  • Decal Sheet

Fits:

  • Traxxas® Slash®
  • Traxxas® Slash® 4×4
  • Associated SC10
  • Associated SC10 4×4
  • Losi XXX-SCT
  • Losi TEN-SCTE 4WD
  • HPI Blitz
  • Ultima SC

Specs:

Length: 21.2″ (539mm)
Width: 9.3″ (236mm)
Height: 5.8″ (147mm)
Wheel Base: 12.8″ (325mm)

3364-00 – $35.66

RC Car Action - RC Cars & Trucks | Pro-Line Late April RCX Releases
F-11 SC 2.2″/3.0″ Wheels for SC10RS 2WD, SC10 4×4, Ten-SCTE and ProTrac Kit Trucks

Pro-Line is proud to introduce an all-new Short Course wheel design: the Formula 11 spoke +3mm offset Short Course Wheel. This +3mm wider offset wheel brings the Associated Short Course trucks out to maximum legal width and makes the trucks more stable in the corners and over the bumps. The new F-11 wheel styling brings the tough and rugged look of full-size Short Course trucks straight to your truck. The wheel features a molded-in bead-loc ring, 11 triangulated spokes and a scale P-L logo. This is a must have wheel for all Pro-Line and Associated SC fans!

Features:

  • +3mm wheel for maximum performance
  • Tough 11-spoke wheel design
  • Strong and Durable Nylon Material
  • New P-L Racing Logo and Styling
  • Made in the USA, since 1982

What’s Included:

  • F-11 +3mm Offset SC Wheels (2 pcs)

2739-03 +3 Offset Black $8.88
2739-04 +3 Offset White $8.88
2740-03 ProTrac Offset Black $8.88
2740-04 ProTrac Offset White $8.88

RC Car Action - RC Cars & Trucks | Pro-Line Late April RCX Releases
2011 Camaro GS Clear Body for 1:16 Rally Chassis

This is a 2011 Chevrolet Camaro GS clear body for the Traxxas® 1:16 Rally Chassis. Pro-Line is proud to introduce the ultimate in scale realism and performance for the 1:16 Rally: the 2011 Camaro GS. The full-size Camaro is an icon due to its raw power and speed that is perfectly blended with its aggressive and stylish looks. Now, you can transform your 1:16 rally car into a true race car with Pro-Line’s 2011 Camaro GS. Grand Sport touring car racing represents the ultimate in muscle car road racing and Pro-Line’s new Camaro GS body captures all of the racing details found on the GS racing machines. From the super-low front splitter and rear diffuser to the low-profile hood scoop, the all-new Pro-Line Camaro GS body is a must have for your 1:16 Rally Chassis. Transform your ride – Get a 2011 Camaro GS body right now!

Features:

  • True Chevrolet Camaro GS race car styling
  • Perfect proportions for Traxxas® 1:16 Rally Chassis
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your car

  • Made in the USA, since 1982

What’s Included:

  • 2011 Camaro GS Clear Body (1 pc)
  • Window templates
  • Decal Sheet

Fits:

  • Traxxas® 1:16 Rally Chassis

3371-00 $23.33

RC Car Action - RC Cars & Trucks | Pro-Line Late April RCX Releases
2012 BullDog Clear Body for Associated RC8.2E

This is a 2012 BullDog Clear Body for the Team Associated RC8.2E Electric Buggy. Ryan Cavalieri knows what it takes to win World Championships and understands how bodies affect performance. For 2012, Ryan has improved upon the BullDog design and developed the most advanced body yet: the 2012 BullDog body for the Electric RC8.2E Buggy. Ryan took great care in refining the design for 2012 to create even more stability with enhanced steering to gain an advantage on the track. The windshield is steeper to create more down force over the front wheels and the roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The rear of the roof has been lowered and fins have been added to achieve stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency. This is a must have RC8.2E body for the new racing season!

Features:

  • Improved performance for 2012
  • More stability and improved steering
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your Buggy

  • Made in the USA, since 1982

What’s Included:

  • 2012 BullDog Body (1 pc)
  • Window templates
  • Decal Sheet

Fits:

  • Team Associated RC8.2E

3377-00 $25.88

RC Car Action - RC Cars & Trucks | Pro-Line Late April RCX Releases
2012 BullDog Clear Body for MP9

This is a BullDog Clear Body for the Kyosho MP9 Buggy. Pro-Line’s newest Factory Team driver Cody King is the current World Champion and is preparing to defend his title with the help of BullDog performance for his Kyosho MP9. Pro-Line designed the 2012 BullDog for the MP9 from the ground up to perfectly match Cody’s buggy and deliver the highest performing body ever produced for the Kysosho MP9. Utilizing the newest in 2012 BullDog styling, the MP9 BullDog creates unmatched stability with enhanced steering to gain an advantage on the track. The windshield is steeper to create more down force over the front wheels and the roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The rear of the roof has been lowered and fins have been added to achieve stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency. This is a must have body for the Kyosho MP9 for the new racing season because of the enhanced performance and style!

Features:

  • 2012 BullDog performance & styling for your Kyosho buggy
  • More stability and improved steering
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your Buggy

  • Made in the USA, since 1982

What’s Included:

  • 2012 BullDog Body (1 pc)
  • Window templates
  • Decal Sheet

Fits:

  • Kyosho MP9

3383-00 $25.88

RC Car Action - RC Cars & Trucks | Pro-Line Late April RCX Releases
2012 BullDog Clear Body for RC8T

This is a 2012 BullDog Clear Body for the Team Associated RC8T Truggy. Ryan Cavalieri knows what it takes to win World Championships and understands how bodies affect performance. For 2012, Ryan has improved upon the BullDog design and developed the most advanced body yet: the 2012 BullDog body for the RC8T Truggy. Ryan took great care in refining the design for 2012 to create even more stability with enhanced steering to gain an advantage on the track. The windshield is steeper to create more down force over the front wheels and the roof ridges have been raised to channel the air flow over the middle of the body for increased high-speed stability. The rear of the roof has been lowered and fins have been added to achieve stable air flow over the body. The fins also add rigidity to the body to increase aerodynamic efficiency. This is a must have RC8T body for the new racing season!

Features:

  • Improved performance for 2012
  • More stability and improved steering
  • Made with Crystal Clear Genuine GE Lexan®
  • Four step to Race Ready:

1.) Clean Body and apply included window mask
2.) Paint then peel the over-spray film off
3.) Sticker your body (decal sheet included)
4.) Mount your new body onto your Buggy

  • Made in the USA, since 1982

What’s Included:

  • 2012 BullDog Body (1 pc)
  • Window templates
  • Decal Sheet

Fits:

  • Team Associated RC8T

3378-00 $28.86

RC Car Action - RC Cars & Trucks | Pro-Line Late April RCX Releases
Suburbs 2.2″ 2WD Off-Road Buggy Front Tires for 1:10 Buggy 2WD Front Wheels

Pro-Line is pushing the performance of 2WD front tire tread technology to another level with all-new Suburbs 2WD front tires! Based off of the incredibly successful Suburbs tread design with direct input from Ty Tessmann, the new Suburbs front tire provides an unbelievably smooth steering response that is never grabby or harsh. The tire features offset “house” tire tread that is ideal for outdoor hard-packed/blue grooved tracks or indoor clay surfaces and will provide all the steering you need to out maneuver your competition. All of the test drivers were amazed at the amount of steering feel and performance that this tire provides. If you race 2WD buggy, this is the new must have tire to take you to the front of the pack!

Features:

  • Super smooth steering response on hard packed or indoor clay surfaces
  • Improved low-speed and high-speed steering
  • Need steering? – Get this tire!
  • Made in the USA, since 1982

What’s Included:

  • Suburbs tires (2 pcs)
  • Foam inserts (2 pcs)

Fits:

  • 2.2″ Buggy Front Wheels

Specs:

Height: 3.29″ (84mm)
Width: 1.18″ (30mm)

8216-02 M3 (Soft) $13.98
8216-03 M4 (Super Soft) $13.98
8216-17 MC (Clay) $14.83

RC Car Action - RC Cars & Trucks | Pro-Line Late April RCX Releases
Scrubs T 2.2″ Off-Road Truck Tires for 1:10 Truck 2.2″ Wheels

This is a pair of Scrubs T 1:10 Truck Tires. Introduced for the first time at the 2012 Pro-Line Cactus Classic, the all-new Scrubs T Truck Tire is ready tear up your local track! The Scrubs tread design features a combination of ultra-low profile bars and pins specifically designed for hard packed/blue-grooved conditions and indoor clay tracks. The straight bars down the middle of the tire provide incredible forward traction while the mini-pins on the sides give consistent and predictable side bite. The center tread has the iconic “eyes” and “mouth” design that is carried over from the other Scrubs tread designs and delivers long lasting tread to the most critical part of the tire. When run on the front of your truck, the Scrubs T tire provides tons of consistent steering proven by the fact that this was the tire of choice for many A-Main drivers at the 2012 Cactus Classic – including Dakotah Phend! Truck racing is making a comeback, so outfit your ride with the latest in Truck Racing Tire Technology – Get a set of Scrubs T tires today!

Features:

  • Low-profile bars provide Incredible Forward Bite
  • Mini-pin side tread delivers consistent side traction
  • Represents latest and greatest for 1:10 Truck Racing
  • Inner webbing resists tire expansion
  • Made in the USA, since 1982

What’s Included:

  • Scrubs tires (2 pcs)
  • Foam inserts (2 pcs)

Fits:

  • 2.2″ Truck Rear Wheels

Specs:

Height: 3.92″ (100mm)
Width: 2.08″ (53mm)

8217-02 M3 (Soft) $19.08
8217-03 M4 (Super Soft) $19.93
8217-17 MC (Clay) $20.78

RC Car Action - RC Cars & Trucks | Pro-Line Late April RCX Releases
Desperado 2.2″ Wheels for 1:16 E-REVO®

This is a pair of Desperado 2.2” Black Wheels for 1:16 E-REVO. Pro-Line is proud to introduce a new lightweight wheel specifically designed for the extremely popular 1:16 E-REVO! The wheel features a wider offset, just like Pro-Line’s immensely popular Bead-Loc wheels, that will make your truck more stable and handle bumps and jumps like a champion. Pro-Line’s highly anticipated new 6-spoke Desperado wheel will make your truck the toughest looking one on the block. The wheel is a one-piece glue wheel made out of extremely durable nylon material and features a molded in bead-loc ring for an awesome scale look. This wheel will accept all Pro-Line 2.2” buggy tires giving you a ton of rubber options to tackle any terrain. This is a 12mm hex wheel. Make your truck stand out from the rest and get some Pro-Line Desperado 2.2” wheels today!

Features:

  • Lightweight 1-piece glue wheel
  • Wide offset wheel that improves stability and performance
  • Awesome scale looks
  • Accepts 2.2” Buggy Rear tires
  • Made in the USA, since 1982

What’s Included:

  • Desperado 2.2” Black Wheels (2 pcs)

Fits:

  • Traxxas® 1:16 E-REVO®

2737-03 $8.03

RC Car Action - RC Cars & Trucks | Pro-Line Late April RCX Releases
Lightweight Velocity Wheels for Front or Rear, 1:8 Buggy

This is a set of Lightweight Velocity Wheels for 1:8 Buggies. Pro-Line lives and breathes the philosophy of Racing To Bring You The Best and that is exactly what the all-new Lightweight Velocity 1:8 Buggy wheel represents. Pro-Line engineers worked tirelessly to create the lightest possible wheel without compromising strength to give your buggy the lowest rotating mass and the fastest acceleration ever achieved. The lighter wheel also has a slightly higher level of flex which results in more traction in loose track conditions. The new Lightweight wheel is marked with Pro-Line’s latest P-L logo giving your buggy the best possible look that matches the performance. If you are ready to bring your buggy to the next level, get a set of Lightweight Pro-Line wheels!

Features:

  • Ultra Lightweight Performance Racing Wheel
  • Strong and Durable Nylon Material
  • New P-L Racing Logo and Styling
  • Made in the USA, since 1982

What’s Included:

  • Lightweight Velocity 1:8 Buggy Wheels (4 pcs)

2738-02 Yellow $17.38
2738-04 White $17.38

RC Car Action - RC Cars & Trucks | Pro-Line Late April RCX Releases
Square Fuzzie Off-Road 1:8 Buggy Tires for Front or Rear, 1:8 Buggy

This is a pair of Square Fuzzie 1:8 Buggy Tires. Pro-Line is bringing back one of the most successful and iconic tread patterns of all time; the World Champion Square Fuzzie. The original Square Fuzzie was so advanced for its time that it dominated the race tracks for many years and was never duplicated. Now, Pro-Line is proud to introduce the all new and improved Square Fuzzie for your 1:8 Buggy! The new Square Fuzzie tires feature countless square micro-pins laid out in a traction inducing grid pattern that will stick to the track like Velcro. The long center bars provide tons of forward bite and improved wear over the Original. These tires are ideal for any indoor/outdoor hard-packed dirt track where bar-type tires are not getting the job done. The new Square Fuzzies will give you the confidence inspiring forward and side bite to propel you to the front!

The new Square Fuzzies are already proven winners taking the TQ honors for 2 Rounds at the “Indoor World Championship” Neo Buggy Race in the hands of Ty Tessmann! The ultra-mini pin proved to be the hot setup on the super slick indoor surface found in England.

Don’t just take our word for it, get the new Square Fuzzies now and be the first to dominate your track with Pro-Line’s proven micro-pin technology!

Features:

  • New and Improved version of a World Champion
  • Incredible forward and side traction
  • Long lasting micro-pin tire tread technology
  • Ideal for slick Indoor/Outdoor hard packed tracks
  • Made in the USA, since 1982

What’s Included:

  • Square Fuzzie tires (2 pcs)
  • Closed Cell foam Inserts (2 pcs)

Specs:

Height: 4.31″ (110mm)
Width: 1.68″ (43mm)

9042-02 M3 (Soft) $22.48
9042-03 M4 (Super Soft) $23.33

[nggallery id=737]

If you like this article, check out this additional article on Pro-Line.

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: July 21, 2015 — 4:40 PM
Air Age Media ©