From MIP:
This all in one unique MIP Bi-Metal kit offers up a staggering 35 plus percent drop in rotational mass, all the while still keeping the same binding characteristics that you are used to with a pin drive system! Rated for both super stock and stock classes alike this upgrade will directly increase both bottom end acceleration and decrease motor fatigue. All main components in the kit are made with the highest grade materials ranging from hard anodized 7075-T6 aluminum, heat treated steel, carbide diff components, ground diff rings, and the list goes on. Of course this entire kit is made 100% in the USA. BUY ONCE, BUY MIP!
TARGET CUSTOMERS:
- TLR Super-stock and stock 22 4.0 Racers
COMPETITIVE ADVANTAGES:
- 35% + Reduction in Rotational Mass
- Increased Acceleration
- Pin Drive Binding Characteristics
- Less Motor Fatigue
FEATURES:
- 7075-T6 Hard Anodized Aluminum
- Bi-Metal Outdrives and Bones
- Heat Treated Outdrives
- Carbide Diff Balls
- Ground Diff Rings
- Aluminum T-Nut
- Captured Thrust Assembly
- 100% Made in the USA!
INCLUDES:
2 – MIP Confetti Sticker
1 – MIP Lube &Thread Gel Cup
1 – MIP Diff Lube & Grease Cup
1 – MIP Thread Gel Safety Cup
1 – MIP Inst. Sheet
7 – 1/16” Chrome Steel Ball Bearing
14 – 3/32” Gr.25 Tungsten Carbide Diff Ball
2 – MIP Diff Ring
1 – #2 Hardened Washer
1 – ¼ x 9/32” Diff Spring
1 – 2-56 x .925 Shoulder Diff Screw
1 – MIP Thrust Retainer
2 – 5x8x2.5mm Bearing
1 – MIP T-Nut Housing .250 Bore
1 – MIP T-Nut Insert .250 Bore
2 – 4-40×3/32” Cup Point SHSS
2 – 1/16” x .430 Solid Pin
2 – 1/72” x .250 Cap Screw SHCS
2 – MIP 3/16” CVD™ Coupling
2 – MIP Bi-Metal R-CVD™ Yoke, Front, AE B64
1 – MIP Bi-Metal “Pin” Male Outdrive Cup
1 – MIP Bi-Metal “Pin” Female Outdrive Cup
2 – MIP Bi-Metal R-CVD™ Bone 67mm
2 – MIP Bi-Metal Outdrive Hub
REQUIRES:
- 1 x Diff Gear #TLR2953
- 1 x Stock Axles (#TLR232051)
- 2.0 mm Allen Key – (Suggest – #9008 MIP Hex Driver Wrench 2.0 mm)
COMPATIBLITY:
- TLR 22 4.0 2WD Buggy Kit
#17060 – MSRP $90.00
Visit MIPOnline.com
See more posts about MIP