If you’re looking for your first serious RC car you’ll have a number of crucial features in mind. To begin with you’ll probably be wanting to run it on both the rough, and the smooth, however you’ll also want an exciting performance, inherent strength, and a car that’s easy to maintain. You may even be thinking of something you can upgrade as your skills increase. Well, the striking 2WD Conquest 10ST XB Stadium Truck offers all this, and more. In fact, it’s such a good ready to run package that you may wonder how we’re able to do it for the price. The answer is in the philosophy of our dedicated design team and its desire to give you a perfect introduction.
Starting with the high-performance 550 brushed motor and water-resistant electronics, the first thing that’ll grab you is the 10ST’s surprising speed with the included Helion 6-cell NiMH pack. But that’s not the half of it. As a Conquest 10ST XB owner you can also look forward to the sort of class-leading balance, durability and handling that’s only possible with its four-wheel independent suspension, adjustable oil-filled, coil-over shocks, wide track LCG (low center of gravity) chassis, all-terrain tires, light and impact-resistant composite construction, and rugged drivetrain, complete with slipper clutch. It all amounts to a car that handles well and fully delivers on its promise of beginner-friendly performance. It is, in short, the perfect place to start.
*When using an optional 2S LiPo
Helion Brushed Power System
Equipped with a high-performance Helion 550 brushed motor and 40 amp all-weather ESC, you can be assured of speed and a healthy acceleration no matter what the conditions. Best of all, when you’re ready for even more performance, fitting a Helion brushless upgrade is simplicity itself.
2000mAh Battery and AC Charger
The Helion 2000mAh 6-cell rechargeable NiMH battery pack delivers the power for exciting speeds and long run times while the included charger ensures you’re back driving in the shortest possible time.
Advanced IKONNIK ET3 Transmitter
Offering a class-leading feature set, the advanced IKONNIK ET3 2.4GHz 3-channel sport transmitter offers style, comfort and an interference-free performance, courtesy of IKONNIK’s rock-solid Krypton (Kr) protocol. Functions include servo reversing on both primary channels, steering dual rate, throttle trim, steering trim and, perfect for beginners, throttle end point adjustment.
IKONNIK ET3 Transmitter Features:
- 2.4GHz operation avoids conflicts with other users.
- Easily pairs with IKONNIK Krypton (Kr) protocol radio systems.
- Low voltage warning.
- Switched third channel.
- Ergonomic grip, trigger and steering wheel.
- Steering dual rate.
- End point adjustment.
Ready To Run
The Conquest 10ST XB is supplied 100% factory assembled and ready to run. Included is a brushless power system, IKONNIK ET3 3-channel 2.4GHz Tx, 7.2V 2000mAh NiMH battery and AC mains charger. All you need to complete is 4 ‘AA’ batteries for the transmitter.
Hidden behind the enclosed and protected spur gear is a fully adjustable slipper clutch that eliminates unnecessary loading and wear in the drivetrain and rear suspension.
Maintenance Made Easy
With hex bolts throughout, plus removeable front and rear chassis plates, maintenance is both convenient, quick, and cost effective.
Anodized aluminium caps add a touch of class to the large, adjustable oil-filled coil-over shocks that help keep you in complete control over the roughest off-road conditions.
In tandem with higher spec RC buggies, individual electronic components (steering servo, receiver and speed controller) keep spares costs low and upgrade / tuning options high.
Motor: 550 brushed
ESC: 40A brushed
Battery: 2000mAh 7.2V 6-cell rechargeable NiMH
Gear Pitch: 48P
Wheels: 12mm Hex
Length: 400mm (15.7in)
Height: 150mm (5.9in)
Width: 300mm (11.8in)
Wheelbase: 282mm (11.1in)
Weight (approx): 1.74Kg (3.8lbs)
Pair with: IKONNIK Krypton protocol
What’s in the Box:
- Conquest 10ST XB
- ET3 3-channel 2.4GHz transmitter
- 2000mAh 6-cell 7.2V rechargeable NiMH battery
- Mains battery charger
- Quick-Start Guide
Needed to Complete:
- 4x AA-size batteries for transmitter