The Conquest 10SC XLR Story
Having rapidly established itself as a platform that offers strength, performance and exceptional versatility the 2WD Conquest 10 series has many friends but, until now, not so many Short Course fans. To fill the gap we’ve introduced the Conquest 10SC XLR, a truck that scores high on value while maintaining the speed and the road holding you demand.
Look inside and you’ll find an off-roader that boasts all the advantages of existing Conquest XLR cars including a high-performance 3300kV brushless motor, water-resistant LiPo-compatible electronics, four wheel independent suspension and adjustable oil-filled coil-over shocks. We’ve also given it a wide track LCG (low center of gravity) chassis, all-terrain tires, a light and impact-resistant composite construction and a rugged drivetrain complete with slipper clutch.
The result is a vehicle that’s perfectly placed to satisfy your need for speed, using either the included 6-cell NiMH or your own 3s LiPo. Offering exceptional handling, unrivalled strength and a refreshing ease of maintenance that’s served by non integrated electronic components the Conquest 10SC XLR is a car that fully delivers on its promise to thrill. For Short Course fans it’s the ultimate back-yarder.
Helion Brushless Power System
Equipped with a high-performance Helion 3652 3300kV brushless motor and 50 amp all-weather ESC, you can be assured of speed and acceleration no matter what the conditions. Once you’ve mastered driving with the supplied 7.2V NiMH battery you can upgrade to a 3S LiPo battery and unleash the full potential of the 10SC XLR.
2000mAh Battery and AC Charger
The Helion 2000mAh 6-cell rechargeable NiMH battery pack delivers the power for exciting speeds and long run times while the included charger ensures you’re back driving in the shortest possible time.
Advanced IKONNIK ET3 Transmitter
Offering a class-leading feature set, the advanced IKONNIK ET3 2.4GHz 3-channel sport transmitter offers style, comfort and an interference-free performance, courtesy of IKONNIK’s rock-solid Krypton (Kr) protocol. Functions include servo reversing on both primary channels, steering dual rate, throttle trim, steering trim and, perfect for beginners, throttle end point adjustment.
IKONNIK ET3 Transmitter Features:
- 2.4GHz operation avoids conflicts with other users.
- Easily pairs with IKONNIK Krypton (Kr) protocol radio systems.
- Low voltage warning.
- Switched third channel.
- Ergonomic grip, trigger and steering wheel.
- Steering dual rate.
- End point adjustment.
Ready To Run
The Conquest 10SC XLR is supplied 100% factory assembled and ready to run. Included is a brushless power system, IKONNIK ET3 3-channel 2.4GHz Tx, 7.2V 2000mAh NiMH battery and AC mains charger. All you need to complete is 4 ‘AA’ batteries for the transmitter.
Hidden behind the enclosed and protected spur gear is a fully adjustable slipper clutch that eliminates unnecessary loading and wear in the drivetrain and rear suspension.
Maintenance Made Easy
With hex bolts throughout, plus removeable front and rear chassis plates, maintenance is both convenient, quick, and cost effective.
Anodized aluminium caps add a touch of class to the large, adjustable oil-filled coil-over shocks that help keep you in complete control over the roughest off-road conditions.
In tandem with higher spec RC buggies, individual electronic components (steering servo, receiver and speed controller) keep spares costs low and increase upgrade / tuning options.
Motor: 3300kV brushless motor
ESC: 50A brushless
Battery: 2000mAh 7.2V 6-cell rechargeable NiMH
Gear Pitch: 48P
Wheels: 12mm Hex
Length: 570mm (22.4in)
Height: 190mm (7.48n)
Width: 290mm (11.42in)
Wheelbase: 325mm (12.8in)
Weight (approx): 1.996Kg (4.4lbs)
Pair with: IKONNIK Krypton protocol
What’s in the Box:
- Conquest 10SC XLR
- ET3 3-channel 2.4GHz transmitter
- 2000mAh 6-cell 7.2V rechargeable NiMH battery
- Mains battery charger
- Quick-Start Guide
Needed to Complete:
- 4x AA-size batteries for transmitter