Helion RTR Conquest 10MT XLR

Helion RTR Conquest 10MT XLR

helion-rtr-conquest-10mt-xlr-2 helion-rtr-conquest-10mt-xlr-4 helion-rtr-conquest-10mt-xlr-6 helion-rtr-conquest-10mt-xlr-7

From Helion:

Finding a brushless Monster Truck that delivers on power, strength and performance, yet still offers amazing value, can be quite a challenge. The very fact that you’re reading this, however, means you’ve found it.

The Conquest 10MT XLR is just such a truck. It is, in short, a 2WD, all-weather, all-terrain, all-rounder that’s as happy backyard bashing as it is leaping off ramps, scorching through scree, or performing long rubber-burning wheelies. Not until you take a closer look will you appreciate the finer points of the rigid, workmanlike, composite chassis, the robust independent suspension and oil-filled, coil-over shocks, the fully enclosed spur gear housing that hides an adjustable slipper clutch, the authentic high-grip, long-wear, V-tread tires and the durable high torque servo.

But that’s not the whole story. Like all top-end RC trucks we’ve made a point of providing stand-alone electronic components to keep maintenance simple and cost effective, we’ve also thrown in a Helion 2000mAh 7.2V rechargeable NiMH battery and, as if that’s not enough, it’s all supported by a high performance 3625 3300Kv brushless motor, Helion 50 amp ESC and IKONNIK’s ET-3 radio with rock-solid Krypton 2.4GHz protocol. That’s quite a package and at such an attractive price you can relax and drive it like you stole it… Which, to be fair, you almost did.

*When using an optional 3S LiPo

Helion Brushless Power System

Equipped with a high-performance Helion 3625 3300kV brushless motor and 50 amp all-weather ESC, you can be assured of speed and acceleration no matter what the conditions. Once you’ve mastered driving with the supplied 7.2V NiMH battery you can upgrade to a 3S LiPo and unleash the full potential of the 10MT XLR.

2000mAh Battery and AC Charger

The Helion 2000mAh 6-cell rechargeable NiMH battery pack delivers the power for exciting speeds and long run times while the included charger ensures you’re back driving in the shortest possible time.

Advanced IKONNIK ET3 Transmitter

Offering a class-leading feature set, the advanced IKONNIK ET3 2.4GHz 3-channel sport transmitter offers style, comfort and an interference-free performance, courtesy of IKONNIK’s rock-solid Krypton (Kr) protocol. Functions include servo reversing on both primary channels, steering dual rate, throttle trim, steering trim and, perfect for beginners, throttle end point adjustment.

IKONNIK ET3 Transmitter Features:

  • 2.4GHz operation avoids conflicts with other users.
  • Easily pairs with IKONNIK Krypton (Kr) protocol radio systems.
  • Low voltage warning.
  • Switched third channel.
  • Ergonomic grip, trigger and steering wheel.
  • Steering dual rate.
  • End point adjustment.

Ready To Run

The Conquest 10MT XLR is supplied 100% factory assembled and ready to run. Included is a brushless power system, IKONNIK ET3 3-channel 2.4GHz Tx, 7.2V 2000mAh NiMH battery and AC mains charger. All you need to complete is 4 ‘AA’ batteries for the transmitter.

Non-integrated Electronics

In tandem with higher spec RC buggies, individual electronic components (steering servo, receiver and speed controller) keep spares costs low and increase upgrade / tuning options.

Dust Cover

When you’re out bashing and scribing doughnuts in the dirt you’ll really appreciate the extra protection provided by the MT’s close-fitting dust cover.

Slipper Clutch

Hidden behind the enclosed and protected spur gear is a fully adjustable slipper clutch that eliminates unnecessary loading and wear in the drivetrain and rear suspension.

Adjustable Suspension

Anodized aluminium caps add a touch of class to the large, adjustable oil-filled coil-over shocks that help keep you in complete control over the roughest off-road conditions.

Specifications:

Motor: 3300kV brushless motor
ESC: 50A brushless
Battery: 2000mAh 7.2V 6-cell rechargeable NiMH
Gear Pitch: 48P
Wheels: 12mm Hex
Length: 480mm (18.9in)
Height: 180mm (7.1in)
Width: 330mm (13.0in)
Wheelbase: 282mm (11.1in)
Weight (approx): 2.36Kg (5.2lbs)
Pair with: IKONNIK Krypton protocol

What’s in the Box:

  • Conquest 10MT XLR
  • ET3 3-channel 2.4GHz transmitter
  • 2000mAh 6-cell 7.2V rechargeable NiMH battery
  • Mains battery charger
  • Quick-Start Guide

Needed to Complete:

  • 4x AA-size batteries for transmitter

Visit Helion-RC.com
See more posts about Helion

helion-rtr-conquest-10mt-xlr-3 helion-rtr-conquest-10mt-xlr-1 helion-rtr-conquest-10mt-xlr-10 helion-rtr-conquest-10mt-xlr-9 helion-rtr-conquest-10mt-xlr-8 helion-rtr-conquest-10mt-xlr-6 helion-rtr-conquest-10mt-xlr-5

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: November 10, 2016 — 11:05 AM
Air Age Media ©