Designed to dominate the terrain, drive wilder and destroy the competition, the Brushless ECX® Ruckus® Monster Truck demands respect. This unrelenting beast doesn’t flinch even in the harshest conditions due to waterproof electronics, tough chassis, and well-known ECX durability. The Ruckus is well-equipped to lead the charge in the driveway or backyard with beastly features and an intimidating snarl such as Spektrum™ STX2™ 2Ch 2.4GHz FHSS Radio System, 540 3300Kv 6 Pole Non-Sensored Brushless Motor, 7.6V 3000mAh 2S 20C LiPo Battery, and 20W LiPo AC Balance Charger (2 hour charge time). No matter if you want to attack the unknown outdoors or hit the ramp and fly, the ECX Ruckus is the basher’s choice.
*30MPH + out of the box and capable of 40MPH + with a 3S Lipo battery
Needed to Complete
Nothing! Everything you need is included in the box.
What’s in the box?
(1) ECX® Ruckus® Monster Truck
(1) Spektrum™ STX2® 2.4GHz Transmitter
(1) Spektrum SRX200 2-Channel Receiver
(1) Spektrum S605 9Kg Waterproof Metal Gear Servo
(1) Dynamite® Tazer™ 45A Sensorless Brushless Waterproof ESC
(1) Dynamite Tazer 1/10 6-Pole Brushless Motor
(1) Dynamite 7.6V 3000mAh 2S 20C LiPo, Hardcase with EC3™ Connector
(1) Dynamite 20W LiPo AC Balance Charger
(4) AA Batteries
(1) User Manual
Spektrum STX2 2-Channel 2.4GHz Radio System
FHSS 2.4GHz protocol* offers extended range and interference free performance.
*Not compatible with DSM, DSM2 or DSMR 2.4GHz protocol
Dynamite 3300Kv Brushless Motor
540 3300Kv 6-Pole motor delivers impressive power and efficiency for high speeds and long run times.
Dynamite 45A Brushless ESC
ESC is compatible with Lipo and NiMh batteries, features built-in fan, waterproof and all weather capable.
ESC, Receiver, and Servo are all waterproof making the Ruckus truly an all-weather, all-season and all-country RC truck.
Dynamite 7.6V 3000mAh LiPo Battery
The Dynamite 7.6V 3000mAh 2S 20C LiPo, Hardcase with EC3 connector battery offers great capacity and uses hi-current efficient EC3 connectors.
Durable Nylon Composite Chassis
ECX is about low maintenance and hours of fun without the worry of replacing parts. That’s why all the composites parts conform to the most extreme abuse you can throw at them.
Full Metal Gear Transmission
The 3-gear ECX transmission is made of metal gears to withstand the test of brushless power.
Full Ball Bearings
Smooth, consistent and efficient. Stainless steel ball bearings are equipped throughout to give you the highest in drivetrain durability and efficiency.
12mm Wheel Hexes
Standard 12mm wheel hexes allow for more wheel choices.
Approximate Assembly Time: No assembly required
Ball Bearings: Full Ball Bearings
Batteries: 7.6V 3000mAh 2S 20C LiPo, Hardcase: EC3
Body: Polycarbonate Screened
Charger: 10W LiPo AC Balance Charger
Chassis: Injection Molden Nylon Composite
Completion Level: Ready-To-Run
Differential: Gear, Not Sealed
Drivetrain: 2WD with Gear Differential and Slipper Clutch
Front Track: 13.7 in. (348mm)
Gear Pitch: 48-Pitch
Ground Clearance: 2.42 in. (61.5mm)
Height: 7.8 in. (197mm)
Internal Gear Ratio: 2.6:1
Length: 20.0 in. (508mm)
Motor Size: 540, 3300Kv, 6-Pole
Motor Type: Non-Sensored Brushless
Painted or Clear Bodies: Painted
Radio: Spektrum STX2, 2-Channel
Rear Track: 13.7 in. (348mm)
Shock Type: Composite Long-Travel Coil-Over, Oil-Filled
Speed Control: Included
Spur Gear: 87T
Suspension: 4-Wheel Independent Long-Travel
Tire Compound: Medium
Tire Diameter: 5.3 in. (134.6mm)
Tire Tread: Dynamite Speedtreads Shootout
Vehicle Type: 2WD Electric Monster Truck
Weight: 5.5 lbs (2.5kg)
Wheel Diameter: 2.2 in. (55.9mm)
Wheel Type: Flat Black, 12mm Hex
Wheel Width: 2.0 in. (50.8mm)
Wheelbase: 13.1 in. (332.7mm)
Width: 13.5 in. (342mm)