RCCA Membership 900x250
Log In

Pro-Line

GCM Jeep JK Wrangler [READER’S RIDE]

GCM Jeep JK Wrangler [READER’S RIDE]

Scott Lempert started with a a GCM Tiny Trucks J2 chassis skeleton kit especially developed to fit Chinese Jeep JK bodies that have shown up over the last couple years on eBay. For power he chose a Holmes Hobbies 16T Crawlmaster Pro with a Castle speed control. He dressed it up with extra hood detail […]
Pro-Line Ambush Custom Van [READER’S RIDE]

Pro-Line Ambush Custom Van [READER’S RIDE]

Anthony Stephens’ little Ambush Shorty Van is proof you don’t need a big truck to have big fun. Anthony received his Ambush as a gift, and he was excited because the plethora of static model kit bodies available in this scale gave him lots of parts to work with. He chose the old-school shorty van […]

Ads after 2 posts

PhotoDrone 600x120

Ads after 6 posts

Custom Trophy Truck – VIDEO [READER’S RIDE]

Custom Trophy Truck – VIDEO [READER’S RIDE]

Juan Turcios built his truck around a custom frame of 1/8-inch thick 5055 aluminum. A friend at TenthScaleLifestyle built a full-metal cage for it. The solid rear axle and and front A-arms are from Metal Concepts R/C. Juan made custom faux reservoirs for the Pro-Line Powerstrokes in front and Axial Yeti shocks in back. It […]
Custom 6×6 Crawler [READER’S RIDE]

Custom 6×6 Crawler [READER’S RIDE]

Getting a custom 6×6 truck to have the efficiency and range of motion to be a fully capable crawler can be a challenge, but Daniel Anguita wasn’t interested in a shelf-queen, so he put the work in. He grafted two sets of Axial SCX10 frame rails together with aluminum braces for the truck’s backbone. He […]

Ads after 2 posts

Ads after 6 posts

Axial Wraith-based Trail Rig [READER’S RIDE]

Axial Wraith-based Trail Rig [READER’S RIDE]

Jason Hope sent us these pics of his new trail rig overlooking the ocean near his home in Pacifica, CA. Its an Axial Wraith with a custom polished aluminum frame and cage.  Power comes via an HPI 15t motor run by a Castle Creations Sidewinder controller. It rolls on metal beadlock wheels with Pro-Line 2.3 […]
Axial SCX10 II    [READER’S RIDE]

Axial SCX10 II [READER’S RIDE]

Anthony Newman is obviously an Axial fan, as you can see from the pair of Jeeps he sent in. He runs his ‘00 Cherokee-bodied SCX10 on 3S Lipo, powering a 55-turn motor and an Axial AE5 controller with a 6V Castle BEC. He dressed up the exterior with a set of Integy fog lights and Axial’s […]

Ads after 2 posts

Ads after 6 posts

RC 4x4 600x120
Vaterra Twin Hammers Trail Truck  [READER’S RIDE]

Vaterra Twin Hammers Trail Truck [READER’S RIDE]

The Vaterra is nominally a desert truck, but Jason Hope’s Twin Hammers spends plenty of time getting muddy on mountain trails near his Pacifica, Callifornia home. The muck looks at home on the Pro-Line ’72 Chevy C10 body done in a rusty beater truck motif by Jason himself. He selected upsized Interco Super Swampers from […]
Axial SCX10 with RC4WD Hardbody [READER’S RIDE]

Axial SCX10 with RC4WD Hardbody [READER’S RIDE]

Here’s a beautiful truck in a beautiful setting sent in by Cameron McLean. The chassis is an Axial SCX10-2, dressed up with a 4-door Mojave Hard Body from RC4WD with Customs stripes by Ernesto at URScale banners. Pro-Line supplied the front bumper and 2-inch Light Bar. Pro-Line also delivered the Swamper TSL SX Tires and […]

Ads after 2 posts

Ads after 6 posts

Axial Wraith Trail Frog [READER’S RIDE]

Axial Wraith Trail Frog [READER’S RIDE]

Mark Liersch’s list of upgrades reads like a wish-list for anyone into trail and scale. He beefed up the driveline with Rave G5 machined axles and a RC4WD 2-speed transmission. Big-time torque comes courtesy of RC4WD too in the form of a 45-turn motor controlled through an Axial AE5 speed controller on 2S Lipos. A […]
Pro Tips: TLR’s Eric Willardson Shares His Best

Pro Tips: TLR’s Eric Willardson Shares His Best

Utah has a hardcore, passionate racing scene, and one of its hometown drivers, is TLR’s Eric Willardson. A long time mod racer, Eric can usually be seen at Murph’s IRCR Raceway, where he mixes it up with the other racers on what many consider to be “the Best Dirt in the World.” We got a […]

Ads after 2 posts

Ads after 6 posts

Custom Scale Little Red Wagon [READER’S RIDE]

Custom Scale Little Red Wagon [READER’S RIDE]

Scott Lempert, one of our scratch-build regulars, is back at it with another tribute to a drag-racing classic: The Little Red Wagon Dodge A100 — the legendary wheelie machine driven by Bill Golden from 1965 to 1975. Scott built the body out of styrene sheet after studying numerous period photos of the LRW. He also […]
Custom Mohave Crawler [READER’S RIDE]

Custom Mohave Crawler [READER’S RIDE]

Scott Oney tells us the idea with this project was to build up a Class 1 scale truck on a set of Losi Comp Crawler axles so that he wouldn’t need a speed control with a drag brake. He chose an Axial Dingo chassis, then had to figure out how to mount his RC4WD Mojave […]
Airage Media © 2017
WordPress Video Lightbox