RCCA Membership Presidents Day Sale 900x250
Log In

Product News

Gotta Get: Firebrand RC Impaler Tire Tool

Gotta Get: Firebrand RC Impaler Tire Tool

Ever tried mounting or removing a hard plastic drift tire? It’s a real party. Firebrand’s new Impaler tool gets the job done with good ol’ mechanical leverage. Just crank the handle until the tire pops on (if you’re mounting it) or the rim pops out (if you’re removing the tire). Works with rubber tires too. […]
HobbyKing introduces Basher SaberTooth Truggy

HobbyKing introduces Basher SaberTooth Truggy

This new truggy from Hobby King comes in RTR form and it’s powered by a large .28 nitro burning engine. Hobby King also fitted this truck with a large 400cc fuel tank for long run times between fill ups. You can learn more by checking out the press release from Hobby King below. From HobbyKing: […]

Ads after 2 posts

Hobbico ARA Outcast  600x120

Ads after 6 posts

REDS Racing High Torque Venturi For The 3.5cc On Road M Series Nitro Engine

REDS Racing High Torque Venturi For The 3.5cc On Road M Series Nitro Engine

From REDS Racing: REDS Racing  have released a set of new venturis for the 3.5cc On Road M series engine. The new venturis are available in 8.0 , 8.5  and 9.0 mm and they feature a higher torque maintaining mid and top range power fuel consumption unchanged. High torque venturis are suitable for all M […]
ECX RTR AMP DB 1/10 2WD Desert Buggy

ECX RTR AMP DB 1/10 2WD Desert Buggy

From ECX: From their pinpoint precision to their versatility, buggies have been a mainstay in RC driving for a reason. The ECX® AMP™ Desert Buggy pays homage to buggies of the past with a classic design and modern features that leave less capable rigs sidelined. There’s little that can slow down this no-nonsense buggy, not […]

Ads after 2 posts

Ads after 6 posts

Dynamite RC Prophet Sport Quad 4 X 50W AC/DC Charger

Dynamite RC Prophet Sport Quad 4 X 50W AC/DC Charger

From Dynamite RC: This affordable, durable and full AC/DC powered charger can be utilized for surface, air and marine R/C charging purposes. With the ability to handle 1S to 6S LiPo/LiFe/LiIon batteries as well as 1 to 15-cell Ni-MH and NiCd batteries and a range of selectable currents, the Prophet 50W Quad is an asset […]
Serpent Spyder SRX4 Carbon Fiber Chassis 4WD 1/10 Off-Road Buggy

Serpent Spyder SRX4 Carbon Fiber Chassis 4WD 1/10 Off-Road Buggy

From Serpent: Spyder SRX4 Buggy 4wd 1/10 High end Race level 1/10 scale 4wd buggy. Ready for the racetracks in dirt, clay, grass, astro or carpet. Vice European Champion 2015 : Joern Neumann Carbon fiber 2.5mm chassis with composite side plates. Big bore 12mm hard coated shock-absorbers. Dual belt-driven drive system, with captured long front […]

Ads after 2 posts

Ads after 6 posts

Readers Choice 600x120
110% Racing Navy Grid Tee

110% Racing Navy Grid Tee

From 110% Racing: Get your hands on this limited edition navy version of our Grid Tee! This 100% Cotton T-shirt features the 110% logo in a grid pattern on the upper left chest area, a single logo on the right sleeve, and our “Nothing Less.” slogan across the back. Printed on a high quality Hanes […]
JConcepts Finnisher Body For The TLR 8IGHT-T 3.0

JConcepts Finnisher Body For The TLR 8IGHT-T 3.0

From JConcepts: Body development is never quite finished, but in the case of the new 1/8th truck body by JConcepts, the Finnisher is a polished product. The winner of the 2015 ROAR National Championship, the Finnisher body in the hands of Ryan Maifield is a proven commodity.  JConcepts is here to support the 1/8th truck […]

Ads after 2 posts

Ads after 6 posts

Avid RC8B3 Carbon Fiber Shock Towers

Avid RC8B3 Carbon Fiber Shock Towers

From Avid: RC8B3 5mm Carbon Fiber Shock Towers are made from 100% carbon fiber, set removes 33% of the weight from up high, and a direct stock replacement. Features: 100% Carbon Fiber. Designed as a direct stock replacement (shock geometry maintained). 5mm thick front and rear (moves rear wing back 1mm). Shock tower set removes […]
A Clutch for Electric Cars? TLR Has Them For The 8IGHT-Es

A Clutch for Electric Cars? TLR Has Them For The 8IGHT-Es

Clutches (as in the kind that go on an engine, not a slipper clutch) are required for nitro cars, since there has to be a way for the crankshaft to rotate as the engine idles while the car is stopped. Electric motors simply stop with the car, so there’s no need for a clutch–but a […]

Ads after 2 posts

Ads after 6 posts

Trinity SC5M Chassis Protectors

Trinity SC5M Chassis Protectors

From Trinity: Features: 0.5mm thick vinyl chassis protector for SC5M Die cut for perfect fit Heavy duty adhesive so it stays put Protects expensive aluminum chassis TEP3020 – SC5M White Carbon $18.99 TEP3021 – SC5M Black Carbon $18.99
Trinity White Carbon High Voltage VTA LiPo

Trinity White Carbon High Voltage VTA LiPo

From Trinity: Trinity announces a new addition to the “White Carbon” line of batteries. TEP2305 High Voltage “VTA” pack with 5mm bullet connectors. TEP2305 – $104.99 TEP2305C (Certified Pack) – $104.99 Available: October 2015  
RC Car Action © 2017
WordPress Video Lightbox