Exotek Flite Direct Spur Mount & Top Shaft

From Exotek Racing:

In the world of ultra competitive stock racing at indoor tracks, every gram counts and there is no better way to separate yourself from the pack than having a more efficient and lighter drive train. Less than half the weight of the stock top shaft and slipper and lighter still than our standard spur mount set, when combined with our special lightened spur mount #1725, sold separately. Our ultra light top shaft that has been drilled and the teeth narrowed for increased acceleration and a cooler running motor.

Features:

• Hard anodized 7075 alloy.
• REQUIRES EXOTEK SPUR MOUNT 1726, sold separately.

Pros-

• Extremely light weight
• Less rotating mass
• Lower CG

  Cons-

• You cannot use a slipper on the top shaft
• Must use Exotek or Kimbrough spur gears- can be seen as a positive 🙂

22 3.0 FLITE TOP SHAFT for flite spur mount #1726

• Only 9.5gr complete with hardware and 72 spur- the stock assembly is 22gr!
• Compatible with the entire 22 series but recommended for stock use only.

#1725 – $14.95 MSRP

B6 FLITE TOP SHAFT, for flite spur mount #1726

• For the B6 and B6D (not for the B5 series).
• Only 9.5gr complete with hardware and 72 spur- the stock assembly is 20gr!
• Recommended for stock use only.

#1723 – $14.95 MSRP

RB6.6 FLITE TOP SHAFT, for flite spur mount #1726

• For the entire RB6 line up- 6, 6.6, buggy or truck.
• Only 10gr complete with hardware and 72 spur- the stock assembly is 20gr!
• Compatible with the entire RB6 series but recommended for stock use only.

#1721 – $14.95 MSRP

FLITE DIRECT SPUR MOUNT, ultra light

• Our lightest system yet for increased acceleration and a cooler running motor.
• Extra light slipper eliminator spur gear mounting hub for all B6 series, 22 series and RB6 series buggies and trucks.
• This spur hub is designed for use on Exotek 2017 ‘Flite’ top shafts #1721, 1723, 1725 sold separately.
• In the world of ultra competitive stock racing at indoor tracks, every grams counts and there is no better way to separate yourself from the pack than having a more efficient and lighter drive train.
• Less than half the weight of the stock top shaft and slipper and lighter still than our standard spur mount set, when combined with our special lightened top shafts.
• Choice of polished 7075 blue, black or orange.
• Includes M3x6 hardware for use with Exotek spur gears.

Note: For Kimbrough spurs use M3x5 screws (not included) or M3x6 screws with 1mm thick washers.

EXOTEK or Kimbrough spur gears required:

#301 66 tooth
#150 69 tooth
#143 72 tooth
#161 73 tooth
#162 74 tooth

#1726 – $14.95 MSRP
Visit ExotekRacing.com
See more posts about Exotek Racing