Tamiya TA-07 1/10 4WD Chassis Option Parts

From Tamiya:

Tamiya’s TA07 Pro club-level 1/10 4WD touring car chassis has been out in the hands of club racers since June! Tamiya’s commitment in providing quality Hop-Up Options to further enhance the performance of the car is shown with the release of these exciting optional parts.

RC TA07 Alum Ball Diff Set 37T

This is a ball differential designed to fit the TA-07 racing chassis. Fitting this ball differential in place of the standard gear diff units will give more stable handling. It also has the durability for use together with higher-power motors.

Features:

• Uses twelve 3mm balls.
• Diff joints utilize lightweight and durable anodized aluminum.
• Includes pin protector.
• Compatible with TA07 PRO chassis.

#54689

RC TA07 Direct Coupling Set Front

This is a Direct Coupler (SPOOL) for the TA-07 racing chassis. It gives your machine sharper initial acceleration and more stability under deceleration by fitting this front direct coupling in place of the kit standard gear differential unit. It also contributes to a lighter-weight chassis.

Features:

• Features a black anodized aluminum holder piece.
• Utilizes TRF419 steel direct cups.
• Screws for attachment included.
• Compatible with TA07 PRO chassis.

#54690

RC TA07 Alum Steering Arm Set

These lightweight, rigid aluminum steering arm parts share the proven TRF419 race machine design. Fit them in place of the kit-standard FRP plastic steering parts as they provide sharp steering response and precision handling at high speeds.

Features:

• Aluminum Steering Arm x2
• Parts have a blue anodized finish.
• 8#50 ball bearings are pre-inserted into the arms.
• Recommended for use with Item #5470#5 TA07 Aluminum Steering Bridge.
• Compatible with Item TA07 PRO chassis, plus TRF419 and TRF419X chassis.

#54704

RC TA07 Alum Steering Bridge

This lightweight aluminum steering bridge works in conjunction with item #54704 (TA07 Aluminum Steering Arm Set). It is the same design part as the one used on the proven TRF419 racing chassis. Use this part instead of TA07 PRO kit-standard plastic part to improve steering linkage rigidity, which result in precision handling at high speeds.

Features:

• Aluminum Steering Bridge x1
• Part has a blue anodized finish with TRF logo engraved.
• 630 ball bearings are pre-inserted.
• Recommended for use with Item #54704 TA07 Aluminum Steering Arm Set.
• Compatible with TA07 PRO chassis, plus TRF419 and TRF419X chassis.

#54705

RC TA07 Alum Counter Pulley

This is a lightweight, rigid replacement part for the plastic counter-pulley found in the TA07 PRO’s unique single belt drivetrain. It will add reliability, and improve efficiency.

Features:

• Aluminum Counter Pulley x1
• Part has a stylish blue anodized finish.
• Ball bearing not included.
• Compatible with the TA07 PRO chassis.

#54706

RC TA07 Carbon Damper Stay Front

This lightweight and rigid carbon fiber damper stay is for the TA07 PRO chassis. It provides multiple attachment holes to open up a range of shock angle setup options.

Features:

• Carbon Damper Stay (Rear) x1
• Screws and parts for attachment included.
• Compatible with TA07 PRO chassis.

Note: Use of this stay raises rear body mount attachment position by 8mm compared to using the standard parts.

#54720

RC TA07 Carbon Damper Stay Rear

This lightweight and rigid carbon fiber damper stay is for the TA07 PRO chassis. It provides multiple attachment holes to open up a range of shock angle setup options.

Features:

• Carbon Damper Stay (Rear) x1
• Screws and parts for attachment included.
• Compatible with TA07 PRO chassis.

Note: Use of this stay raises rear body mount attachment position by 8mm compared to using the standard parts.

#54721

RC TA07 Alum Center Pulley 18T

This is a lightweight, rigid replacement for the plastic counter-pulley in the TA07 PRO’s unique single belt drivetrain. The aluminum part increases reliability, plus improves efficiency and torque output.

Features:

• Aluminum Center Pulley (18T) x1
• Pulley uses a low-friction anodized finish.
• Compatible with TA07 PRO chassis.

#54722

RC TA07 PRO Titanium Screw Set

This titanium screw set is for the TA07 PRO chassis kit. The package contains 97 screws of different types for an approximate weight reduction of 20 grams.

Features:

• 36mm Titanium Hex Screw x 5
• 3x8mm Titanium Hex Screw x 10
• 3x8mm Titanium Countersunk Hex Screw x 39
• 3x10mm Titanium Hex Screw x 31
• 3x10mm Titanium Countersunk Hex Screw x 7
• 3x12mm Titanium Hex Screw x 1
• 3x14mm Titanium Countersunk Hex Screw x 2
• 3x16mm Titanium Hex Screw x 2
• Compatible with Item 58636 TA07 PRO Chassis kit.
• Recommended for use with item 54232 RC M3x0.5mm Thread Forming Tap.

#84428

Visit TamiyaUSA.com
See more posts about Tamiya