Spring has been sprung for a while now…are you on the water yet? If you’re looking for a fresh way to hit the waves, take a gander at this bad boy. Kyosho’s Jet Stream measures 35″ long and is ready to turn 4S LiPo power into roost and wake, with Orion outrunner power and adjustable aluminum hardware on the transom. Get all the details after the pics, and click the photos to enlarge.
Visit KyoshoAmerica.com
See more posts about Kyosho
From Kyosho:
Readyset provides thrilling speed and smooth turning performance!
The uniquely designed 2-stepped deep-V hull of the EP Jet Stream 888VE powers through waves and delivers incredible speed and turning ability. For pure unrelenting racing performance, this model offshore racer leaves all in its wake. Ballast compartments built into the sides of the precision engineered high-strength FRP hull structure facilitate the self-righting of the hull. In the event of capsize, water enters the ballast compartment and alters the weight balance to return the hull to its original posture. When the boat starts moving again, water is released automatically so the boat can continue running as it was prior to capsizing. The unsinkable design of the hull structure removes the fear of this precious boat ever being lost to the depths below. The pre-installed brushless outrunner motor generates huge torque but minimizes cavitation through the large high-thrust propeller and also provides wide options for the choice of other propellers. The amazing performance of the EP Jet Stream 888VE can be enjoyed with ease so anyone can experience the exhilaration of power boat racing.
- Pre-colored FRP factory assembled hull reaches speeds of 60km/h.
- Newly designed high-power 80A Team Orion water-cooled ESC features cell auto-detect.
- Pre-installed brushless outrunner water-cooled motor generates excellent torque characteristics.
- Unsinkable self-righting structure.
- Flip-up rudder design prevents damage if boat contacts an obstacle.
- Equipped with combination turn fin and trim tab with adjustable angle.
- Features stopper to prevent loss of shaft.
- Includes drip proof rubber boots, aluminum servo mount, carbon nylon 3-blade propeller.
Technical Data
|
Length | 900mm (35.4 in.) |
Width | 187mm (7.4 in.) |
Height | 140mm (5.5 in.) |
Weight | 1,780g (approx. installed 14.8V-1400mAh) (3 lbs., 15 oz.) |
Motor | Brushless outruuner water-cooled Aqua Speed Pro BLS3744 |
Battery | 3-4 cell 11.1V-14.8V-3,600-4,000mAh Li-Po (Super Plug specification, sold separately) |
Prop | Carbon-reinforced nylon D40 x P1.4 (3-blade) |
Speed Control | Team Orion water-cooled 80A waterproof ESC |
Servo | KS-201 pre-installed |