HobbyKing TrackStar Easy Fit Connectors

HobbyKing TrackStar Easy Fit Connectors

HobbyKing TrackStar Easy Fit Connectors (4) HobbyKing TrackStar Easy Fit Connectors (3)

From HobbyKing:

The TracksStar Easy Fit Brushless Motor Connectors are the new “must have” item for anyone who has an R/C car. These incredibly handy connectors have a screw that threads through a connector that is soldered to the motor’s wire tabs and into a corresponding connector on the power wires. This means when you want to change motors you simply unscrew the existing leads and screw them to another motor. You only need to solder to the motor once which significantly reduces the chance of damage to the sensitive electronics inside. Each pack contains 3 motor side connectors and 3  parallel and 3 right angle wire connectors so you can vary the way the wires run from your motor. Once you have tried this product you will never go back to the old way of wiring up ESCs.

Features:

  • Suit for 540size sensored brushless motor
  • Wire can weld as stright/45 degree/90 degree out
  • Fit for 14 and 12 AWG wire

Specs:

Screw size: M2x12mm

#9171000749-0 – TrackStar Easy Fit Brushless Motor Connectors (3 Sets) – $6.32

HobbyKing TrackStar Easy Fit Connectors (10) HobbyKing TrackStar Easy Fit Connectors (6)

The TracksStar Easy Fit ESC Connectors are the new “must have” item for anyone who has an R/C car. These incredibly handy connectors have a screw that threads through the ESC connector and into a corresponding connector on the motor and power wires. This means when you want to change motors or power leads or you want to swap the ESC into another chassis you simply unscrew the existing leads and replace them with the new leads. You only need to solder to the ESC once which significantly reduces the chance of damage to the sensitive electronics inside. Each pack contains 5 ESC side connectors and 5 vertical and 5 horizontal wire connectors so you can vary the way the wires are positioned inside the chassis. Once you have tried this product you will never go back to the old way of wiring up ESCs.

Features:

  • Suit for most 1/10 brushless ESC
  • Wire can weld as stright/45 degree/90 degree out
  • Fit for 14 and 12 AWG wire

Specs:

Screw size: M2x12mm
Base pole diameter: 2.8mm

#9171000763-0 – TrackStar Easy Fit ESC Connectors (5 pair / set) – $8.27

[nggallery id=1424]

Never miss an issue of RC Car Action!

Subscribe today with a Digital Edition subscription or Print + Digital combo!

 

Updated: October 21, 2015 — 12:55 PM
Air Age Media ©